From: Angelo Dureghello <angelo@xxxxxxxx> [ Upstream commit aa54c1c9d90e6db75190813907190fadcce1bf45 ] On ColdFire mcf54418, using DSPI_DMA_MODE mode, spi transfers at first boot stage are not succeding: m25p80 spi0.1: unrecognized JEDEC id bytes: 00, 00, 00 The reason is the SPI_SR initial value set by the driver, that is not clearing (not setting to 1) the RF_DF flag. After a tour on the dspi hw modules that use this driver(Vybrid, ColdFire and ls1021a) a better init value for SR register has been set. Signed-off-by: Angelo Dureghello <angelo@xxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/spi/spi-fsl-dspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index cce9e34306787..6da70a62e1964 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -76,7 +76,7 @@ #define SPI_SR 0x2c #define SPI_SR_EOQF 0x10000000 #define SPI_SR_TCFQF 0x80000000 -#define SPI_SR_CLEAR 0xdaad0000 +#define SPI_SR_CLEAR 0x9aaf0000 #define SPI_RSER_TFFFE BIT(25) #define SPI_RSER_TFFFD BIT(24) -- 2.25.1
