From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
commit 0187294d227dfc42889e1da8f8ce1e44fc25f147 upstream.
When devm_regmap_init_i2c() returns an error code, a pairing
runtime PM usage counter decrement is needed to keep the
counter balanced. For error paths after ak8974_set_power(),
ak8974_detect() and ak8974_reset(), things are the same.
However, When iio_triggered_buffer_setup() returns an error
code, there will be two PM usgae counter decrements.
Signed-off-by: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
Fixes: 7c94a8b2ee8c ("iio: magn: add a driver for AK8974")
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/magnetometer/ak8974.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/iio/magnetometer/ak8974.c
+++ b/drivers/iio/magnetometer/ak8974.c
@@ -769,19 +769,21 @@ static int ak8974_probe(struct i2c_clien
ak8974->map = devm_regmap_init_i2c(i2c, &ak8974_regmap_config);
if (IS_ERR(ak8974->map)) {
dev_err(&i2c->dev, "failed to allocate register map\n");
+ pm_runtime_put_noidle(&i2c->dev);
+ pm_runtime_disable(&i2c->dev);
return PTR_ERR(ak8974->map);
}
ret = ak8974_set_power(ak8974, AK8974_PWR_ON);
if (ret) {
dev_err(&i2c->dev, "could not power on\n");
- goto power_off;
+ goto disable_pm;
}
ret = ak8974_detect(ak8974);
if (ret) {
dev_err(&i2c->dev, "neither AK8974 nor AMI30x found\n");
- goto power_off;
+ goto disable_pm;
}
ret = ak8974_selftest(ak8974);
@@ -791,14 +793,9 @@ static int ak8974_probe(struct i2c_clien
ret = ak8974_reset(ak8974);
if (ret) {
dev_err(&i2c->dev, "AK8974 reset failed\n");
- goto power_off;
+ goto disable_pm;
}
- pm_runtime_set_autosuspend_delay(&i2c->dev,
- AK8974_AUTOSUSPEND_DELAY);
- pm_runtime_use_autosuspend(&i2c->dev);
- pm_runtime_put(&i2c->dev);
-
indio_dev->dev.parent = &i2c->dev;
indio_dev->channels = ak8974_channels;
indio_dev->num_channels = ARRAY_SIZE(ak8974_channels);
@@ -851,6 +848,11 @@ no_irq:
goto cleanup_buffer;
}
+ pm_runtime_set_autosuspend_delay(&i2c->dev,
+ AK8974_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&i2c->dev);
+ pm_runtime_put(&i2c->dev);
+
return 0;
cleanup_buffer:
@@ -859,7 +861,6 @@ disable_pm:
pm_runtime_put_noidle(&i2c->dev);
pm_runtime_disable(&i2c->dev);
ak8974_set_power(ak8974, AK8974_PWR_OFF);
-power_off:
regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
return ret;
