From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
[ Upstream commit 7684580d45bd3d84ed9b453a4cadf7a9a5605a3f ]
During device removal, the driver should unregister the SPI controller
and stop the hardware. Otherwise the dspi_transfer_one_message() could
wait on completion infinitely.
Additionally, calling spi_unregister_controller() first in device
removal reverse-matches the probe function, where SPI controller is
registered at the end.
Fixes: 05209f457069 ("spi: fsl-dspi: add missing clk_disable_unprepare() in dspi_remove()")
Reported-by: Vladimir Oltean <olteanv@xxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200622110543.5035-1-krzk@xxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/spi/spi-fsl-dspi.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 89d403dfb3bdf..38d337f0967db 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1441,11 +1441,20 @@ static int dspi_remove(struct platform_device *pdev)
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
/* Disconnect from the SPI framework */
+ spi_unregister_controller(dspi->ctlr);
+
+ /* Disable RX and TX */
+ regmap_update_bits(dspi->regmap, SPI_MCR,
+ SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF,
+ SPI_MCR_DIS_TXF | SPI_MCR_DIS_RXF);
+
+ /* Stop Running */
+ regmap_update_bits(dspi->regmap, SPI_MCR, SPI_MCR_HALT, SPI_MCR_HALT);
+
dspi_release_dma(dspi);
if (dspi->irq)
free_irq(dspi->irq, dspi);
clk_disable_unprepare(dspi->clk);
- spi_unregister_controller(dspi->ctlr);
return 0;
}
--
2.25.1
