From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
commit 130206a88683d859f63ed6d4a56ab5c2b4930c8e upstream.
The PMC needs to be notified separately about HPD (hotplug
detected) signal being high after mode entry. There is a bit
"HPD High" in the Alternate Mode Request that the driver
already sets, but that bit is only valid when the
DisplayPort Alternate Mode is directly entered from
disconnected state.
Fixes: 5c4edcdbcd97 ("usb: typec: mux: intel: Fix DP_HPD_LVL bit field")
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Tested-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200529131753.15587-1-heikki.krogerus@xxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/typec/mux/intel_pmc_mux.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index c22e5c4bbf1a9..e35508f5e1287 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -129,7 +129,8 @@ pmc_usb_mux_dp_hpd(struct pmc_usb_port *port, struct typec_mux_state *state)
msg[0] = PMC_USB_DP_HPD;
msg[0] |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
- msg[1] = PMC_USB_DP_HPD_IRQ;
+ if (data->status & DP_STATUS_IRQ_HPD)
+ msg[1] = PMC_USB_DP_HPD_IRQ;
if (data->status & DP_STATUS_HPD_STATE)
msg[1] |= PMC_USB_DP_HPD_LVL;
@@ -142,6 +143,7 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
{
struct typec_displayport_data *data = state->data;
struct altmode_req req = { };
+ int ret;
if (data->status & DP_STATUS_IRQ_HPD)
return pmc_usb_mux_dp_hpd(port, state);
@@ -161,7 +163,14 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
if (data->status & DP_STATUS_HPD_STATE)
req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH;
- return pmc_usb_command(port, (void *)&req, sizeof(req));
+ ret = pmc_usb_command(port, (void *)&req, sizeof(req));
+ if (ret)
+ return ret;
+
+ if (data->status & DP_STATUS_HPD_STATE)
+ return pmc_usb_mux_dp_hpd(port, state);
+
+ return 0;
}
static int
--
2.25.1
