From: Claudiu Manoil <claudiu.manoil@xxxxxxx> [ Upstream commit 0574e2000fc3103cbc69ba82ec1175ce171fdf5e ] The rings bitmap of an interrupt vector encodes which of the device's rings were assigned to that interrupt vector. Hence the iteration range of the tx rings bitmap (for_each_set_bit()) should be the total number of Tx rings of that netdevice instead of the number of rings assigned to the interrupt vector. Since there are 2 cores, and one interrupt vector for each core, the number of rings asigned to an interrupt vector is half the number of available rings. The impact of this error is that the upper half of the tx rings could still generate interrupts during napi polling. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@xxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/ethernet/freescale/enetc/enetc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index b6ff893074092..4ef4d41b0d8d6 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -254,7 +254,7 @@ static irqreturn_t enetc_msix(int irq, void *data) /* disable interrupts */ enetc_wr_reg(v->rbier, 0); - for_each_set_bit(i, &v->tx_rings_map, v->count_tx_rings) + for_each_set_bit(i, &v->tx_rings_map, ENETC_MAX_NUM_TXQS) enetc_wr_reg(v->tbier_base + ENETC_BDR_OFF(i), 0); napi_schedule_irqoff(&v->napi); @@ -290,7 +290,7 @@ static int enetc_poll(struct napi_struct *napi, int budget) /* enable interrupts */ enetc_wr_reg(v->rbier, ENETC_RBIER_RXTIE); - for_each_set_bit(i, &v->tx_rings_map, v->count_tx_rings) + for_each_set_bit(i, &v->tx_rings_map, ENETC_MAX_NUM_TXQS) enetc_wr_reg(v->tbier_base + ENETC_BDR_OFF(i), ENETC_TBIER_TXTIE); -- 2.25.1