From: Peter Chen <peter.chen@xxxxxxx> commit ba3a80fe0fb67d8790f62b7bc60df97406d89871 upstream. It should use the correct direction value from register, not depends on previous software setting. It fixed the EP number wrong issue at trace when the TRBERR interrupt occurs for EP0IN. When the EP0IN IOC has finished, software prepares the setup packet request, the expected direction is OUT, but at that time, the TRBERR for EP0IN may occur since it is DMULT mode, the DMA does not stop until TRBERR has met. Cc: <stable@xxxxxxxxxxxxxxx> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Pawel Laszczak <pawell@xxxxxxxxxxx> Signed-off-by: Peter Chen <peter.chen@xxxxxxx> Signed-off-by: Felipe Balbi <balbi@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/cdns3/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/trace.h b/drivers/usb/cdns3/trace.h index e92348c9b4d71..7cc8bebaa07da 100644 --- a/drivers/usb/cdns3/trace.h +++ b/drivers/usb/cdns3/trace.h @@ -150,7 +150,7 @@ DECLARE_EVENT_CLASS(cdns3_log_ep0_irq, __dynamic_array(char, str, CDNS3_MSG_MAX) ), TP_fast_assign( - __entry->ep_dir = priv_dev->ep0_data_dir; + __entry->ep_dir = priv_dev->selected_ep; __entry->ep_sts = ep_sts; ), TP_printk("%s", cdns3_decode_ep0_irq(__get_str(str), -- 2.25.1