On 6/28/20 10:52 AM, Hans de Goede wrote:
The default mode for SSP configuration is TDM 4 slot and so far we were
using this for the bus format on cht-bsw-rt56732 boards.
One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2.
The second piggy-backed, output-only codec is inside the keyboard-dock
(which has extra speakers). Unlike the main rt5672 codec, we cannot
configure this codec, it is hard coded to use 2 channel 24 bit I2S.
Using 4 channel TDM leads to the dock speakers codec (which listens in on
the data send from the SSP to the rt5672 codec) emiting horribly distorted
sound.
Since we only support 2 channels anyways, there is no need for TDM on any
cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere.
This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing
the bus format set in cht_codec_fixup() to I2S 2 channel.
This change has been tested on the following devices with a rt5672 codec:
Lenovo Miix 2 10
Lenovo Thinkpad 8
Lenovo Thinkpad 10 (gen 1)
Cc: stable@xxxxxxxxxxxxxxx
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
sound/soc/intel/boards/cht_bsw_rt5672.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c
index 7a43c70a1378..22e432768edb 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5672.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5672.c
@@ -253,21 +253,20 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
/*
- * Default mode for SSP configuration is TDM 4 slot
+ * Default mode for SSP configuration is TDM 4 slot. One board/design,
+ * the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The
+ * second piggy-backed, output-only codec is inside the keyboard-dock
+ * (which has extra speakers). Unlike the main rt5672 codec, we cannot
+ * configure this codec, it is hard coded to use 2 channel 24 bit I2S.
+ * Since we only support 2 channels anyways, there is no need for TDM
+ * on any cht-bsw-rt5672 designs. So we simply use I2S 2ch everywhere.
*/
The change looks fine, but you may want to add additional comments to
explain what happens here.
The default mode for the SSP configuration is TDM 4 slot for the cpu-dai
(hard-coded in DSP firmware)
the default mode for the SSP configuration is I2S for the codec-dai
(hard-coded in the 'SSP2-Codec" .dai_fmt masks, so far unused).
So with this change, you trade one dynamic configuration for another
(was codec, not cpu). It works because of the pre-existing hard-coded
values for the parts that are not set in this function.
- ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0),
- SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_IB_NF |
+ ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0) {
- dev_err(rtd->dev, "can't set format to TDM %d\n", ret);
- return ret;
- }
-
- /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
- ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0xF, 0xF, 4, 24);
- if (ret < 0) {
- dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
+ dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); > return ret;
}
