From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> [ Upstream commit 4d3da2d8d91f66988a829a18a0ce59945e8ae4fb ] While trying to use the lantiq_gswip driver on one of my boards I made a mistake when specifying the phy-mode (because the out-of-tree driver wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the following error is printed multiple times: Unsupported interface: 3 While it gives at least a hint at what may be wrong it is not very user friendly. Print the human readable phy-mode and also which port is configured incorrectly (this hardware supports ports 0..6) to improve the cases where someone made a mistake. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Acked-by: Hauke Mehrtens <hauke@xxxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/dsa/lantiq_gswip.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index cf6fa8fede334..521ebc072903b 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -1452,7 +1452,8 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port, unsupported: bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); - dev_err(ds->dev, "Unsupported interface: %d\n", state->interface); + dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", + phy_modes(state->interface), port); return; } -- 2.25.1