From: Marc Zyngier <maz@xxxxxxxxxx> [ Upstream commit 87dccf09323fc363bd0d072fcc12b96622ab8c69 ] The vim3l board does not work with a standard PCIe switch (ASM1184e), spitting all kind of errors - hinting at HW misconfiguration (no link, port enumeration issues, etc). According to the the Synopsys DWC PCIe Reference Manual, in the section dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as: "Sets all internal timers to fast mode for simulation purposes." it is sound to set this bit from a simulation perspective, but on actual silicon, which expects timers to have a nominal value, it is not. Make sure the FAST_LINK_MODE bit is cleared when configuring the RC to solve this problem. Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@xxxxxxxxxx Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx> [lorenzo.pieralisi@xxxxxxx: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/pci/controller/dwc/pci-meson.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c index 3715dceca1bfa..ca59ba9e0ecd3 100644 --- a/drivers/pci/controller/dwc/pci-meson.c +++ b/drivers/pci/controller/dwc/pci-meson.c @@ -289,11 +289,11 @@ static void meson_pcie_init_dw(struct meson_pcie *mp) meson_cfg_writel(mp, val, PCIE_CFG0); val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF); - val &= ~LINK_CAPABLE_MASK; + val &= ~(LINK_CAPABLE_MASK | FAST_LINK_MODE); meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF); val = meson_elb_readl(mp, PCIE_PORT_LINK_CTRL_OFF); - val |= LINK_CAPABLE_X1 | FAST_LINK_MODE; + val |= LINK_CAPABLE_X1; meson_elb_writel(mp, val, PCIE_PORT_LINK_CTRL_OFF); val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF); -- 2.25.1