From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> [ Upstream commit aef1a3799b5cb3ba4841f6034497b179646ccc70 ] To not trigger the warnings provided by CONFIG_PWM_DEBUG - use up-rounding in .get_state() - don't divide by the result of a division - don't use the rounded counter value for the period length to calculate the counter value for the duty cycle Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/pwm/pwm-imx27.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c index a6e40d4c485f3..732a6f3701e8e 100644 --- a/drivers/pwm/pwm-imx27.c +++ b/drivers/pwm/pwm-imx27.c @@ -150,13 +150,12 @@ static void pwm_imx27_get_state(struct pwm_chip *chip, prescaler = MX3_PWMCR_PRESCALER_GET(val); pwm_clk = clk_get_rate(imx->clk_per); - pwm_clk = DIV_ROUND_CLOSEST_ULL(pwm_clk, prescaler); val = readl(imx->mmio_base + MX3_PWMPR); period = val >= MX3_PWMPR_MAX ? MX3_PWMPR_MAX : val; /* PWMOUT (Hz) = PWMCLK / (PWMPR + 2) */ - tmp = NSEC_PER_SEC * (u64)(period + 2); - state->period = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk); + tmp = NSEC_PER_SEC * (u64)(period + 2) * prescaler; + state->period = DIV_ROUND_UP_ULL(tmp, pwm_clk); /* * PWMSAR can be read only if PWM is enabled. If the PWM is disabled, @@ -167,8 +166,8 @@ static void pwm_imx27_get_state(struct pwm_chip *chip, else val = imx->duty_cycle; - tmp = NSEC_PER_SEC * (u64)(val); - state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk); + tmp = NSEC_PER_SEC * (u64)(val) * prescaler; + state->duty_cycle = DIV_ROUND_UP_ULL(tmp, pwm_clk); pwm_imx27_clk_disable_unprepare(imx); } @@ -220,22 +219,23 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip); struct pwm_state cstate; unsigned long long c; + unsigned long long clkrate; int ret; u32 cr; pwm_get_state(pwm, &cstate); - c = clk_get_rate(imx->clk_per); - c *= state->period; + clkrate = clk_get_rate(imx->clk_per); + c = clkrate * state->period; - do_div(c, 1000000000); + do_div(c, NSEC_PER_SEC); period_cycles = c; prescale = period_cycles / 0x10000 + 1; period_cycles /= prescale; - c = (unsigned long long)period_cycles * state->duty_cycle; - do_div(c, state->period); + c = clkrate * state->duty_cycle; + do_div(c, NSEC_PER_SEC * prescale); duty_cycles = c; /* -- 2.25.1
