From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> [ Upstream commit 1cacdf5d3bb9644ac7b9339c611ac5b9dd90d09d ] It's uncertain where the "vreg_s8a_l3a_input" comes from, but the supply for VDD_L3_L11 on PM8994 should be VREG_S3A_1P3, so correct this - and drop the vreg_s8a_l3a_input. Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx> Fixes: 83d9ed4342a3 ("arm64: dts: qcom: db820c: Use regulator names from schematics") Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Link: https://lore.kernel.org/r/20200417070712.1376355-1-bjorn.andersson@xxxxxxxxxx Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index c4abbccf2bed0..eaa1eb70b4555 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -117,16 +117,6 @@ regulator-max-microvolt = <3700000>; }; - vreg_s8a_l3a_input: vreg-s8a-l3a-input { - compatible = "regulator-fixed"; - regulator-name = "vreg_s8a_l3a_input"; - regulator-always-on; - regulator-boot-on; - - regulator-min-microvolt = <0>; - regulator-max-microvolt = <0>; - }; - wlan_en: wlan-en-1-8v { pinctrl-names = "default"; pinctrl-0 = <&wlan_en_gpios>; @@ -705,14 +695,14 @@ vdd_s11-supply = <&vph_pwr>; vdd_s12-supply = <&vph_pwr>; vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; - vdd_l3_l11-supply = <&vreg_s8a_l3a_input>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; vdd_l5_l7-supply = <&vreg_s5a_2p15>; vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; vdd_l8_l16_l30-supply = <&vph_pwr>; vdd_l14_l15-supply = <&vreg_s5a_2p15>; vdd_l25-supply = <&vreg_s3a_1p3>; - vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; vreg_s3a_1p3: s3 { regulator-name = "vreg_s3a_1p3"; -- 2.25.1