From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> Currently when marking a block, we use spinand_erase_op() to erase the block before writing the marker to the OOB area. Doing so without waiting for the operation to finish can lead to the marking failing silently and no bad block marker being written to the flash. In fact we don't need to do an erase at all before writing the BBM. The ECC is disabled for raw accesses to the OOB data and we don't need to work around any issues with chips reporting ECC errors as it is known to be the case for raw NAND. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> Link: https://lore.kernel.org/linux-mtd/20200218100432.32433-4-frieder.schrempf@xxxxxxxxxx --- drivers/mtd/nand/spi/core.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c index c74a7b5ef3..e0ebd9c04b 100644 --- a/drivers/mtd/nand/spi/core.c +++ b/drivers/mtd/nand/spi/core.c @@ -712,19 +712,10 @@ static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos) }; int ret; - /* Erase block before marking it bad. */ ret = spinand_select_target(spinand, pos->target); if (ret) return ret; - ret = spinand_write_enable_op(spinand); - if (ret) - return ret; - - ret = spinand_erase_op(spinand, pos); - if (ret) - return ret; - return spinand_write_page(spinand, &req); } -- 2.27.0