Patch "SCSI: isci: correct erroneous for_each_isci_host macro" has been added to the 3.4-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    SCSI: isci: correct erroneous for_each_isci_host macro

to the 3.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     scsi-isci-correct-erroneous-for_each_isci_host-macro.patch
and it can be found in the queue-3.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From c59053a23d586675c25d789a7494adfdc02fba57 Mon Sep 17 00:00:00 2001
From: Lukasz Dorau <lukasz.dorau@xxxxxxxxx>
Date: Thu, 6 Feb 2014 12:23:20 -0800
Subject: SCSI: isci: correct erroneous for_each_isci_host macro

From: Lukasz Dorau <lukasz.dorau@xxxxxxxxx>

commit c59053a23d586675c25d789a7494adfdc02fba57 upstream.

In the first place, the loop 'for' in the macro 'for_each_isci_host'
(drivers/scsi/isci/host.h:314) is incorrect, because it accesses
the 3rd element of 2 element array. After the 2nd iteration it executes
the instruction:
        ihost = to_pci_info(pdev)->hosts[2]
(while the size of the 'hosts' array equals 2) and reads an
out of range element.

In the second place, this loop is incorrectly optimized by GCC v4.8
(see http://marc.info/?l=linux-kernel&m=138998871911336&w=2).
As a result, on platforms with two SCU controllers,
the loop is executed more times than it can be (for i=0,1 and 2).
It causes kernel panic during entering the S3 state
and the following oops after 'rmmod isci':

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8131360b>] __list_add+0x1b/0xc0
Oops: 0000 [#1] SMP
RIP: 0010:[<ffffffff8131360b>]  [<ffffffff8131360b>] __list_add+0x1b/0xc0
Call Trace:
  [<ffffffff81661b84>] __mutex_lock_slowpath+0x114/0x1b0
  [<ffffffff81661c3f>] mutex_lock+0x1f/0x30
  [<ffffffffa03e97cb>] sas_disable_events+0x1b/0x50 [libsas]
  [<ffffffffa03e9818>] sas_unregister_ha+0x18/0x60 [libsas]
  [<ffffffffa040316e>] isci_unregister+0x1e/0x40 [isci]
  [<ffffffffa0403efd>] isci_pci_remove+0x5d/0x100 [isci]
  [<ffffffff813391cb>] pci_device_remove+0x3b/0xb0
  [<ffffffff813fbf7f>] __device_release_driver+0x7f/0xf0
  [<ffffffff813fc8f8>] driver_detach+0xa8/0xb0
  [<ffffffff813fbb8b>] bus_remove_driver+0x9b/0x120
  [<ffffffff813fcf2c>] driver_unregister+0x2c/0x50
  [<ffffffff813381f3>] pci_unregister_driver+0x23/0x80
  [<ffffffffa04152f8>] isci_exit+0x10/0x1e [isci]
  [<ffffffff810d199b>] SyS_delete_module+0x16b/0x2d0
  [<ffffffff81012a21>] ? do_notify_resume+0x61/0xa0
  [<ffffffff8166ce29>] system_call_fastpath+0x16/0x1b

The loop has been corrected.
This patch fixes kernel panic during entering the S3 state
and the above oops.

Signed-off-by: Lukasz Dorau <lukasz.dorau@xxxxxxxxx>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@xxxxxxxxx>
Tested-by: Lukasz Dorau <lukasz.dorau@xxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
Signed-off-by: James Bottomley <JBottomley@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/scsi/isci/host.h |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -310,9 +310,8 @@ static inline struct isci_pci_info *to_p
 }
 
 #define for_each_isci_host(id, ihost, pdev) \
-	for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \
-	     id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \
-	     ihost = to_pci_info(pdev)->hosts[++id])
+	for (id = 0; id < SCI_MAX_CONTROLLERS && \
+	     (ihost = to_pci_info(pdev)->hosts[id]); id++)
 
 static inline enum isci_status isci_host_get_state(struct isci_host *isci_host)
 {


Patches currently in stable-queue which might be from lukasz.dorau@xxxxxxxxx are

queue-3.4/scsi-isci-correct-erroneous-for_each_isci_host-macro.patch
queue-3.4/scsi-isci-fix-reset-timeout-handling.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]