From: Takashi Sakamoto <o-takashi@xxxxxxxxxxxxx> commit f4588cc425beb62e355bc2a5de5d5c83e26a74ca upstream. In the latter models of RME Fireface series, device start to transfer packets several dozens of milliseconds. On the other hand, ALSA fireface driver starts IR context 2 milliseconds after the start. This results in loss to handle incoming packets on the context. This commit changes to start IR context immediately instead of postponement. For Fireface 800, this affects nothing because the device transfer packets 100 milliseconds or so after the start and this is within wait timeout. Cc: <stable@xxxxxxxxxxxxxxx> Fixes: acfedcbe1ce4 ("ALSA: firewire-lib: postpone to start IR context") Signed-off-by: Takashi Sakamoto <o-takashi@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20200510074301.116224-3-o-takashi@xxxxxxxxxxxxx Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- sound/firewire/fireface/ff-stream.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) --- a/sound/firewire/fireface/ff-stream.c +++ b/sound/firewire/fireface/ff-stream.c @@ -184,7 +184,6 @@ int snd_ff_stream_start_duplex(struct sn */ if (!amdtp_stream_running(&ff->rx_stream)) { int spd = fw_parent_device(ff->unit)->max_speed; - unsigned int ir_delay_cycle; err = ff->spec->protocol->begin_session(ff, rate); if (err < 0) @@ -200,14 +199,7 @@ int snd_ff_stream_start_duplex(struct sn if (err < 0) goto error; - // The device postpones start of transmission mostly for several - // cycles after receiving packets firstly. - if (ff->spec->protocol == &snd_ff_protocol_ff800) - ir_delay_cycle = 800; // = 100 msec - else - ir_delay_cycle = 16; // = 2 msec - - err = amdtp_domain_start(&ff->domain, ir_delay_cycle); + err = amdtp_domain_start(&ff->domain, 0); if (err < 0) goto error;