This is a note to let you know that I've just added the patch titled
pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility
to the 3.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pinctrl-sunxi-use-chained_irq_-enter-exit-for-gic-compatibility.patch
and it can be found in the queue-3.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 905a5117e79367b7e58ae046d12ca9961f048c89 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@xxxxxxxx>
Date: Tue, 11 Feb 2014 00:22:37 +0800
Subject: pinctrl: sunxi: use chained_irq_{enter, exit} for GIC compatibility
From: Chen-Yu Tsai <wens@xxxxxxxx>
commit 905a5117e79367b7e58ae046d12ca9961f048c89 upstream.
On tha Allwinner A20 SoC, the external interrupts on the pin controller
device are connected to the GIC. Without chained_irq_{enter, exit},
external GPIO interrupts, such as used by mmc core card detect, cause
the system to hang.
This issue was first encountered during my attempt to get out-of-band
interrupts for WiFi on the Cubietruck working. With David's new series
of sunci-mci using mmc slot-gpio for (GPIO interrupt based) card
detection, removing the SD card also causes my Cubietruck to hang. This
problem should extend to all Allwinner A20 based boards.
With this fix, the system no longer hangs when I remove or insert the
SD card. /proc/interrupts show that the interrupt has correctly fired.
However the system still does not detect card removal/insertion. I
believe this is another unrelated issue.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/pinctrl/pinctrl-sunxi.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -665,6 +666,7 @@ static struct irq_chip sunxi_pinctrl_irq
static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
{
+ struct irq_chip *chip = irq_get_chip(irq);
struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
@@ -674,10 +676,12 @@ static void sunxi_pinctrl_irq_handler(un
if (reg) {
int irqoffset;
+ chained_irq_enter(chip, desc);
for_each_set_bit(irqoffset, ®, SUNXI_IRQ_NUMBER) {
int pin_irq = irq_find_mapping(pctl->domain, irqoffset);
generic_handle_irq(pin_irq);
}
+ chained_irq_exit(chip, desc);
}
}
Patches currently in stable-queue which might be from wens@xxxxxxxx are
queue-3.13/pinctrl-sunxi-use-chained_irq_-enter-exit-for-gic-compatibility.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html