[PATCH 5.4 27/38] scsi: pm: Balance pm_only counter of request queue during system resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Can Guo <cang@xxxxxxxxxxxxxx>

[ Upstream commit 05d18ae1cc8a0308b12f37b4ab94afce3535fac9 ]

During system resume, scsi_resume_device() decreases a request queue's
pm_only counter if the scsi device was quiesced before. But after that, if
the scsi device's RPM status is RPM_SUSPENDED, the pm_only counter is still
held (non-zero). Current SCSI resume hook only sets the RPM status of the
scsi_device and its request queue to RPM_ACTIVE, but leaves the pm_only
counter unchanged. This may make the request queue's pm_only counter remain
non-zero after resume hook returns, hence those who are waiting on the
mq_freeze_wq would never be woken up. Fix this by calling
blk_post_runtime_resume() if a sdev's RPM status was RPM_SUSPENDED.

(struct request_queue)0xFFFFFF815B69E938
	pm_only = (counter = 2),
	rpm_status = 0,
	dev = 0xFFFFFF815B0511A0,

((struct device)0xFFFFFF815B0511A0)).power
	is_suspended = FALSE,
	runtime_status = RPM_ACTIVE,

(struct scsi_device)0xffffff815b051000
	request_queue = 0xFFFFFF815B69E938,
	sdev_state = SDEV_RUNNING,
	quiesced_by = 0x0,

B::v.f_/task_0xFFFFFF810C246940
-000|__switch_to(prev = 0xFFFFFF810C246940, next = 0xFFFFFF80A49357C0)
-001|context_switch(inline)
-001|__schedule(?)
-002|schedule()
-003|blk_queue_enter(q = 0xFFFFFF815B69E938, flags = 0)
-004|generic_make_request(?)
-005|submit_bio(bio = 0xFFFFFF80A8195B80)

Link: https://lore.kernel.org/r/1588740936-28846-1-git-send-email-cang@xxxxxxxxxxxxxx
Reviewed-by: Bart Van Assche <bvanassche@xxxxxxx>
Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/scsi/scsi_pm.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index 3717eea37ecb..5f0ad8b32e3a 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -80,6 +80,10 @@ static int scsi_dev_type_resume(struct device *dev,
 	dev_dbg(dev, "scsi resume: %d\n", err);
 
 	if (err == 0) {
+		bool was_runtime_suspended;
+
+		was_runtime_suspended = pm_runtime_suspended(dev);
+
 		pm_runtime_disable(dev);
 		err = pm_runtime_set_active(dev);
 		pm_runtime_enable(dev);
@@ -93,8 +97,10 @@ static int scsi_dev_type_resume(struct device *dev,
 		 */
 		if (!err && scsi_is_sdev_device(dev)) {
 			struct scsi_device *sdev = to_scsi_device(dev);
-
-			blk_set_runtime_active(sdev->request_queue);
+			if (was_runtime_suspended)
+				blk_post_runtime_resume(sdev->request_queue, 0);
+			else
+				blk_set_runtime_active(sdev->request_queue);
 		}
 	}
 
-- 
2.25.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux