From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
[ Upstream commit e26dead442689a861358f33126210b0f8de615a9 ]
B850v3, B650v3 and B450v3 all have a GPIO bit banged MDIO bus to
communicate with a Marvell switch. On all devices the switch is
connected to a PCI based network card, which needs to be referenced
by DT, so this also adds the common PCI root node.
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6q-bx50v3.dtsi | 62 +++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index e4a415fd899b..ff8928a0b406 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -92,6 +92,56 @@
mux-int-port = <1>;
mux-ext-port = <4>;
};
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+
+ mdio0: mdio-gpio {
+ compatible = "virtual,mdio-gpio";
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
+ <&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch@0 {
+ compatible = "marvell,mv88e6085"; /* 88e6240*/
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ switch_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switchphy0: switchphy@0 {
+ reg = <0>;
+ };
+
+ switchphy1: switchphy@1 {
+ reg = <1>;
+ };
+
+ switchphy2: switchphy@2 {
+ reg = <2>;
+ };
+
+ switchphy3: switchphy@3 {
+ reg = <3>;
+ };
+
+ switchphy4: switchphy@4 {
+ reg = <4>;
+ };
+ };
+ };
+ };
};
&ecspi5 {
@@ -299,3 +349,15 @@
tcxo-clock-frequency = <26000000>;
};
};
+
+&pcie {
+ /* Synopsys, Inc. Device */
+ pci_root: root@0,0 {
+ compatible = "pci16c3,abcd";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ };
+};
--
2.25.1
