[PATCH 4.14 017/114] geneve: only configure or fill UDP_ZERO_CSUM6_RX/TX info when CONFIG_IPV6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hangbin Liu <liuhangbin@xxxxxxxxx>

commit f9094b7603c011d27db7ba109e69881c72fa611d upstream.

Stefano pointed that configure or show UDP_ZERO_CSUM6_RX/TX info doesn't
make sense if we haven't enabled CONFIG_IPV6. Fix it by adding
if IS_ENABLED(CONFIG_IPV6) check.

Fixes: abe492b4f50c ("geneve: UDP checksum configuration via netlink")
Fixes: fd7eafd02121 ("geneve: fix fill_info when link down")
Signed-off-by: Hangbin Liu <liuhangbin@xxxxxxxxx>
Reviewed-by: Stefano Brivio <sbrivio@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/geneve.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -1369,21 +1369,33 @@ static int geneve_nl2info(struct nlattr
 	}
 
 	if (data[IFLA_GENEVE_UDP_ZERO_CSUM6_TX]) {
+#if IS_ENABLED(CONFIG_IPV6)
 		if (changelink) {
 			attrtype = IFLA_GENEVE_UDP_ZERO_CSUM6_TX;
 			goto change_notsup;
 		}
 		if (nla_get_u8(data[IFLA_GENEVE_UDP_ZERO_CSUM6_TX]))
 			info->key.tun_flags &= ~TUNNEL_CSUM;
+#else
+		NL_SET_ERR_MSG_ATTR(extack, data[IFLA_GENEVE_UDP_ZERO_CSUM6_TX],
+				    "IPv6 support not enabled in the kernel");
+		return -EPFNOSUPPORT;
+#endif
 	}
 
 	if (data[IFLA_GENEVE_UDP_ZERO_CSUM6_RX]) {
+#if IS_ENABLED(CONFIG_IPV6)
 		if (changelink) {
 			attrtype = IFLA_GENEVE_UDP_ZERO_CSUM6_RX;
 			goto change_notsup;
 		}
 		if (nla_get_u8(data[IFLA_GENEVE_UDP_ZERO_CSUM6_RX]))
 			*use_udp6_rx_checksums = false;
+#else
+		NL_SET_ERR_MSG_ATTR(extack, data[IFLA_GENEVE_UDP_ZERO_CSUM6_RX],
+				    "IPv6 support not enabled in the kernel");
+		return -EPFNOSUPPORT;
+#endif
 	}
 
 	return 0;
@@ -1559,11 +1571,13 @@ static int geneve_fill_info(struct sk_bu
 		goto nla_put_failure;
 
 	if (metadata && nla_put_flag(skb, IFLA_GENEVE_COLLECT_METADATA))
-			goto nla_put_failure;
+		goto nla_put_failure;
 
+#if IS_ENABLED(CONFIG_IPV6)
 	if (nla_put_u8(skb, IFLA_GENEVE_UDP_ZERO_CSUM6_RX,
 		       !geneve->use_udp6_rx_checksums))
 		goto nla_put_failure;
+#endif
 
 	return 0;
 





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux