From: Vinod Koul <vkoul@xxxxxxxxxx>
[ Upstream commit fd4a5177382230d39e0d95632d98103fb2938383 ]
Driver missed initializing num_por which is one of the por values that
driver configures to hardware. In order to get these values, add a new
structure ethqos_emac_driver_data which holds por and num_por values
and populate that in driver probe.
Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos")
Reported-by: Rahul Ankushrao Kawadgave <rahulak@xxxxxxxxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 17 ++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -75,6 +75,11 @@ struct ethqos_emac_por {
unsigned int value;
};
+struct ethqos_emac_driver_data {
+ const struct ethqos_emac_por *por;
+ unsigned int num_por;
+};
+
struct qcom_ethqos {
struct platform_device *pdev;
void __iomem *rgmii_base;
@@ -171,6 +176,11 @@ static const struct ethqos_emac_por emac
{ .offset = RGMII_IO_MACRO_CONFIG2, .value = 0x00002060 },
};
+static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
+ .por = emac_v2_3_0_por,
+ .num_por = ARRAY_SIZE(emac_v2_3_0_por),
+};
+
static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
{
unsigned int val;
@@ -442,6 +452,7 @@ static int qcom_ethqos_probe(struct plat
struct device_node *np = pdev->dev.of_node;
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
+ const struct ethqos_emac_driver_data *data;
struct qcom_ethqos *ethqos;
struct resource *res;
int ret;
@@ -471,7 +482,9 @@ static int qcom_ethqos_probe(struct plat
goto err_mem;
}
- ethqos->por = of_device_get_match_data(&pdev->dev);
+ data = of_device_get_match_data(&pdev->dev);
+ ethqos->por = data->por;
+ ethqos->num_por = data->num_por;
ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
if (IS_ERR(ethqos->rgmii_clk)) {
@@ -526,7 +539,7 @@ static int qcom_ethqos_remove(struct pla
}
static const struct of_device_id qcom_ethqos_match[] = {
- { .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_por},
+ { .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
{ }
};
MODULE_DEVICE_TABLE(of, qcom_ethqos_match);
