[PATCH] mtd: rawnand: Fix nand_gpio_waitrdy()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mimic what's done in nand_soft_waitrdy() and add one to the jiffies
timeout so we don't end up waiting less than actually required.

Reported-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
Fixes: b0e137ad24b6c ("mtd: rawnand: Provide helper for polling GPIO R/B pin")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
Reviewed-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
---
 drivers/mtd/nand/raw/nand_base.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 2d2a216af120..169150a7c140 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -790,8 +790,14 @@ EXPORT_SYMBOL_GPL(nand_soft_waitrdy);
 int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod,
 		      unsigned long timeout_ms)
 {
-	/* Wait until R/B pin indicates chip is ready or timeout occurs */
-	timeout_ms = jiffies + msecs_to_jiffies(timeout_ms);
+
+	/*
+	 * Wait until R/B pin indicates chip is ready or timeout occurs.
+	 * +1 below is necessary because if we are now in the last fraction
+	 * of jiffy and msecs_to_jiffies is 1 then we will wait only that
+	 * small jiffy fraction - possibly leading to false timeout.
+	 */
+	timeout_ms = jiffies + msecs_to_jiffies(timeout_ms) + 1;
 	do {
 		if (gpiod_get_value_cansleep(gpiod))
 			return 0;
-- 
2.25.4




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux