From: Baruch Siach <baruch@xxxxxxxxxx>
[ Upstream commit c3e302edca2457bbd0c958c445a7538fbf6a6ac8 ]
Read the temperature sensor register from the correct location for the
88E2110 PHY. There is no enable/disable bit on 2110, so make
mv3310_hwmon_config() run on 88X3310 only.
Fixes: 62d01535474b61 ("net: phy: marvell10g: add support for the 88x2110 PHY")
Cc: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>
Reviewed-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/phy/marvell10g.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -44,6 +44,9 @@ enum {
MV_PCS_PAIRSWAP_AB = 0x0002,
MV_PCS_PAIRSWAP_NONE = 0x0003,
+ /* Temperature read register (88E2110 only) */
+ MV_PCS_TEMP = 0x8042,
+
/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
* registers appear to set themselves to the 0x800X when AN is
* restarted, but status registers appear readable from either.
@@ -54,6 +57,7 @@ enum {
/* Vendor2 MMD registers */
MV_V2_PORT_CTRL = 0xf001,
MV_V2_PORT_CTRL_PWRDOWN = 0x0800,
+ /* Temperature control/read registers (88X3310 only) */
MV_V2_TEMP_CTRL = 0xf08a,
MV_V2_TEMP_CTRL_MASK = 0xc000,
MV_V2_TEMP_CTRL_SAMPLE = 0x0000,
@@ -79,6 +83,24 @@ static umode_t mv3310_hwmon_is_visible(c
return 0;
}
+static int mv3310_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+ return phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
+}
+
+static int mv2110_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+ return phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_TEMP);
+}
+
+static int mv10g_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+ if (phydev->drv->phy_id == MARVELL_PHY_ID_88X3310)
+ return mv3310_hwmon_read_temp_reg(phydev);
+ else /* MARVELL_PHY_ID_88E2110 */
+ return mv2110_hwmon_read_temp_reg(phydev);
+}
+
static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *value)
{
@@ -91,7 +113,7 @@ static int mv3310_hwmon_read(struct devi
}
if (type == hwmon_temp && attr == hwmon_temp_input) {
- temp = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
+ temp = mv10g_hwmon_read_temp_reg(phydev);
if (temp < 0)
return temp;
@@ -144,6 +166,9 @@ static int mv3310_hwmon_config(struct ph
u16 val;
int ret;
+ if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310)
+ return 0;
+
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP,
MV_V2_TEMP_UNKNOWN);
if (ret < 0)
