[PATCH] pwm: lpss: Fix get_state runtime-pm reference handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Before commit cfc4c189bc70 ("pwm: Read initial hardware state at request
time"), a driver's get_state callback would get called once per PWM from
pwmchip_add().

pwm-lpss' runtime-pm code was relying on this, getting a runtime-pm ref for
PWMs which are enabled at probe time from within its get_state callback,
before enabling runtime-pm.

The change to calling get_state at request time causes a number of
problems:

1. PWMs enabled at probe time may get runtime suspended before they are
requested, causing e.g. a LCD backlight controlled by the PWM to turn off.

2. When the request happens when the PWM has been runtime suspended, the
ctrl register will read all 1 / 0xffffffff, causing get_state to store
bogus values in the pwm_state.

3. get_state was using an async pm_runtime_get() call, because it assumed
that runtime-pm has not been enabled yet. If shortly after the request an
apply call is made, then the pwm_lpss_is_updating() check may trigger
because the resume triggered by the pm_runtime_get() call is not complete
yet, so the ctrl register still reads all 1 / 0xffffffff.

This commit fixes these issues by moving the initial pm_runtime_get() call
for PWMs which are enabled at probe time to the pwm_lpss_probe() function;
and by making get_state take a runtime-pm ref before reading the ctrl reg.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1828927
Fixes: cfc4c189bc70 ("pwm: Read initial hardware state at request time")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 drivers/pwm/pwm-lpss.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
index 75bbfe5f3bc2..9d965ffe66d1 100644
--- a/drivers/pwm/pwm-lpss.c
+++ b/drivers/pwm/pwm-lpss.c
@@ -158,7 +158,6 @@ static int pwm_lpss_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
-/* This function gets called once from pwmchip_add to get the initial state */
 static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 			       struct pwm_state *state)
 {
@@ -167,6 +166,8 @@ static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long long base_unit, freq, on_time_div;
 	u32 ctrl;
 
+	pm_runtime_get_sync(chip->dev);
+
 	base_unit_range = BIT(lpwm->info->base_unit_bits);
 
 	ctrl = pwm_lpss_read(pwm);
@@ -187,8 +188,7 @@ static void pwm_lpss_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 	state->polarity = PWM_POLARITY_NORMAL;
 	state->enabled = !!(ctrl & PWM_ENABLE);
 
-	if (state->enabled)
-		pm_runtime_get(chip->dev);
+	pm_runtime_put(chip->dev);
 }
 
 static const struct pwm_ops pwm_lpss_ops = {
@@ -202,7 +202,8 @@ struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
 {
 	struct pwm_lpss_chip *lpwm;
 	unsigned long c;
-	int ret;
+	int i, ret;
+	u32 ctrl;
 
 	if (WARN_ON(info->npwm > MAX_PWMS))
 		return ERR_PTR(-ENODEV);
@@ -232,6 +233,12 @@ struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
 		return ERR_PTR(ret);
 	}
 
+	for (i = 0; i < lpwm->info->npwm; i++) {
+		ctrl = pwm_lpss_read(&lpwm->chip.pwms[i]);
+		if (ctrl & PWM_ENABLE)
+			pm_runtime_get(dev);
+	}
+
 	return lpwm;
 }
 EXPORT_SYMBOL_GPL(pwm_lpss_probe);
-- 
2.26.0




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux