[PATCH for-rc or next 1/3] IB/hfi1: Do not destroy hfi1_wq when the device is shut down

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kaike Wan <kaike.wan@xxxxxxxxx>

The workqueue hfi1_wq is destroyed in function shutdown_device(), which
is called by either shutdown_one() or remove_one(). The function
shutdown_one() is called when the kernel is rebooted while remove_one()
is called when the hfi1 driver is unloaded. When the kernel is rebooted,
hfi1_wq is destroyed while all qps are still active, leading to a
kernel crash:

[ 198.891986] BUG: unable to handle kernel NULL pointer dereference at 0000000000000102
[ 198.892072] IP: [<ffffffff94cb7b02>] __queue_work+0x32/0x3e0
[ 198.892130] PGD 0
[ 198.892156] Oops: 0000 [#1] SMP
[ 198.892193] Modules linked in: dm_round_robin nvme_rdma(OE) nvme_fabrics(OE) nvme_core(OE) ib_isert iscsi_target_mod target_core_mod ib_ucm mlx4_ib iTCO_wdt iTCO_vendor_support mxm_wmi sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm rpcrdma sunrpc irqbypass crc32_pclmul ghash_clmulni_intel rdma_ucm aesni_intel ib_uverbs lrw gf128mul opa_vnic glue_helper ablk_helper ib_iser cryptd ib_umad rdma_cm iw_cm ses enclosure libiscsi scsi_transport_sas pcspkr joydev ib_ipoib(OE) scsi_transport_iscsi ib_cm sg ipmi_ssif mei_me lpc_ich i2c_i801 mei ioatdma ipmi_si dm_multipath ipmi_devintf ipmi_msghandler wmi acpi_pad acpi_power_meter hangcheck_timer ip_tables ext4 mbcache jbd2 mlx4_en sd_mod crc_t10dif crct10dif_generic mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm hfi1(OE)
[ 198.892997] crct10dif_pclmul crct10dif_common crc32c_intel drm ahci mlx4_core libahci rdmavt(OE) igb megaraid_sas ib_core libata drm_panel_orientation_quirks ptp pps_core devlink dca i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod
[ 198.893233] CPU: 19 PID: 0 Comm: swapper/19 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1
[ 198.893317] Hardware name: Phegda X2226A/S2600CW, BIOS SE5C610.86B.01.01.0024.021320181901 02/13/2018
[ 198.893388] task: ffff8a799ba0d140 ti: ffff8a799bad8000 task.ti: ffff8a799bad8000
[ 198.893447] RIP: 0010:[<ffffffff94cb7b02>] [<ffffffff94cb7b02>] __queue_work+0x32/0x3e0
[ 198.893518] RSP: 0018:ffff8a90dde43d80 EFLAGS: 00010046
[ 198.893561] RAX: 0000000000000082 RBX: 0000000000000086 RCX: 0000000000000000
[ 198.893617] RDX: ffff8a90b924fcb8 RSI: 0000000000000000 RDI: 000000000000001b
[ 198.893674] RBP: ffff8a90dde43db8 R08: ffff8a799ba0d6d8 R09: ffff8a90dde53900
[ 198.893730] R10: 0000000000000002 R11: ffff8a90dde43de8 R12: ffff8a90b924fcb8
[ 198.893786] R13: 000000000000001b R14: 0000000000000000 R15: ffff8a90d2890000
[ 198.893843] FS: 0000000000000000(0000) GS:ffff8a90dde40000(0000) knlGS:0000000000000000
[ 198.893905] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 198.893953] CR2: 0000000000000102 CR3: 0000001a70410000 CR4: 00000000001607e0
[ 198.894009] Call Trace:
[ 198.894058] [<ffffffff94cb8105>] queue_work_on+0x45/0x50
[ 198.894161] [<ffffffffc03f781e>] _hfi1_schedule_send+0x6e/0xc0 [hfi1]
[ 198.894244] [<ffffffffc03f78a2>] hfi1_schedule_send+0x32/0x70 [hfi1]
[ 198.894311] [<ffffffffc02cf2d9>] rvt_rc_timeout+0xe9/0x130 [rdmavt]
[ 198.894366] [<ffffffff94ce563a>] ? trigger_load_balance+0x6a/0x280
[ 198.894426] [<ffffffffc02cf1f0>] ? rvt_free_qpn+0x40/0x40 [rdmavt]
[ 198.894482] [<ffffffff94ca7f58>] call_timer_fn+0x38/0x110
[ 198.894537] [<ffffffffc02cf1f0>] ? rvt_free_qpn+0x40/0x40 [rdmavt]
[ 198.894589] [<ffffffff94caa3bd>] run_timer_softirq+0x24d/0x300
[ 198.894641] [<ffffffff94ca0f05>] __do_softirq+0xf5/0x280
[ 198.894689] [<ffffffff9537832c>] call_softirq+0x1c/0x30
[ 198.894736] [<ffffffff94c2e675>] do_softirq+0x65/0xa0
[ 198.894780] [<ffffffff94ca1285>] irq_exit+0x105/0x110
[ 198.894826] [<ffffffff953796c8>] smp_apic_timer_interrupt+0x48/0x60
[ 198.894881] [<ffffffff95375df2>] apic_timer_interrupt+0x162/0x170
[ 198.894930] <EOI>
[ 198.894955] [<ffffffff951adfb7>] ? cpuidle_enter_state+0x57/0xd0
[ 198.895012] [<ffffffff951ae10e>] cpuidle_idle_call+0xde/0x230
[ 198.895063] [<ffffffff94c366de>] arch_cpu_idle+0xe/0xc0
[ 198.896984] [<ffffffff94cfc3ba>] cpu_startup_entry+0x14a/0x1e0
[ 198.898879] [<ffffffff94c57db7>] start_secondary+0x1f7/0x270
[ 198.900750] [<ffffffff94c000d5>] start_cpu+0x5/0x14

The solution is to destroy the workqueue only when the hfi1 driver is
unloaded, not when the device is shut down.

Fixes: 8d3e71136a08 ("IB/{hfi1, qib}: Add handling of kernel restart")
Cc: <stable@xxxxxxxxxxxxxxx>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@xxxxxxxxx>
Signed-off-by: Kaike Wan <kaike.wan@xxxxxxxxx>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@xxxxxxxxx>
---
 drivers/infiniband/hw/hfi1/init.c |   24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c
index 3759d92..10fb5c6 100644
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -829,6 +829,25 @@ static int create_workqueues(struct hfi1_devdata *dd)
 }
 
 /**
+ * destroy_workqueues - destroy per port workqueues
+ * @dd: the hfi1_ib device
+ */
+static void destroy_workqueues(struct hfi1_devdata *dd)
+{
+	int pidx;
+	struct hfi1_pportdata *ppd;
+
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		ppd = dd->pport + pidx;
+
+		if (ppd->hfi1_wq) {
+			destroy_workqueue(ppd->hfi1_wq);
+			ppd->hfi1_wq = NULL;
+		}
+	}
+}
+
+/**
  * enable_general_intr() - Enable the IRQs that will be handled by the
  * general interrupt handler.
  * @dd: valid devdata
@@ -1102,10 +1121,6 @@ static void shutdown_device(struct hfi1_devdata *dd)
 		 */
 		hfi1_quiet_serdes(ppd);
 
-		if (ppd->hfi1_wq) {
-			destroy_workqueue(ppd->hfi1_wq);
-			ppd->hfi1_wq = NULL;
-		}
 		if (ppd->link_wq) {
 			destroy_workqueue(ppd->link_wq);
 			ppd->link_wq = NULL;
@@ -1757,6 +1772,7 @@ static void remove_one(struct pci_dev *pdev)
 	 * clear dma engines, etc.
 	 */
 	shutdown_device(dd);
+	destroy_workqueues(dd);
 
 	stop_timers(dd);
 




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux