From: Roger Shimizu <rogershimizu@xxxxxxxxx>
commit 0418138e2ffd90f4a00b263593f2e199db87321d upstream.
The GPIOs controlling the LEDs, listed below, are active high, not low:
- gpio-leds: "lswvl:red:alarm" pin
- gpio-leds: "lswvl:red:func" pin
- gpio-leds: "lswvl:amber:info" pin
- gpio-leds: "lswvl:blue:func" pin
- gpio-leds: "lswvl:red:hdderr{0,1}" pin
Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl")
Signed-off-by: Roger Shimizu <rogershimizu@xxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/kirkwood-lswvl.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/arch/arm/boot/dts/kirkwood-lswvl.dts
+++ b/arch/arm/boot/dts/kirkwood-lswvl.dts
@@ -186,22 +186,22 @@
led@1 {
label = "lswvl:red:alarm";
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
};
led@2 {
label = "lswvl:red:func";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
led@3 {
label = "lswvl:amber:info";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
};
led@4 {
label = "lswvl:blue:func";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
};
led@5 {
@@ -212,12 +212,12 @@
led@6 {
label = "lswvl:red:hdderr0";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
led@7 {
label = "lswvl:red:hdderr1";
- gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
