Re: [PATCH] epoll: ensure ep_poll() doesn't miss wakeup events

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-05-04 06:59, Jason Baron wrote:
On 5/4/20 12:29 AM, Jason Baron wrote:


On 5/3/20 6:24 AM, Roman Penyaev wrote:
On 2020-05-02 00:09, Jason Baron wrote:
On 5/1/20 5:02 PM, Roman Penyaev wrote:
Hi Jason,

That is indeed a nice catch.
Seems we need smp_rmb() pair between list_empty_careful(&rp->rdllist) and
READ_ONCE(ep->ovflist) for ep_events_available(), do we?


Hi Roman,

Good point, even if we order those reads its still racy, since the
read of the ready list could come after its been cleared and the
read of the overflow could again come after its been cleared.

You mean the second chunk? True. Sigh.

So I'm afraid we might need instead something like this to make
sure they are read together:

No, impossible, I can't believe in that :) We can't give up.

All we need is to keep a mark, that ep->rdllist is not empty,
even we've just spliced it.  ep_poll_callback() always takes
the ->ovflist path, if ->ovflist is not EP_UNACTIVE_PTR, but
ep_events_available() does not need to observe ->ovflist at
all, just a ->rdllist.

Take a look at that, do I miss something? :

diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index aba03ee749f8..a8770f9a917e 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -376,8 +376,7 @@ static void ep_nested_calls_init(struct nested_calls *ncalls)
  */
 static inline int ep_events_available(struct eventpoll *ep)
 {
-       return !list_empty_careful(&ep->rdllist) ||
-               READ_ONCE(ep->ovflist) != EP_UNACTIVE_PTR;
+       return !list_empty_careful(&ep->rdllist);
 }

 #ifdef CONFIG_NET_RX_BUSY_POLL
@@ -683,7 +682,8 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
 {
        __poll_t res;
        struct epitem *epi, *nepi;
-       LIST_HEAD(txlist);
+       LIST_HEAD(rdllist);
+       LIST_HEAD(ovflist);

        lockdep_assert_irqs_enabled();

@@ -704,14 +704,22 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
         * in a lockless way.
         */
        write_lock_irq(&ep->lock);
-       list_splice_init(&ep->rdllist, &txlist);
+       /*
+        * We do not call list_splice_init() because for lockless
+        * ep_events_available() ->rdllist is still "not empty".
+        * Otherwise the feature that there is something left in
+        * the list can be lost which causes missed wakeup.
+        */
+       list_splice(&ep->rdllist, &rdllist);
+       /*
+        * If ->rdllist was empty we should pretend it was not,
+        * because after the unlock ->ovflist comes into play,
+        * which is invisible for lockless ep_events_available().
+        */
+       ep->rdllist.next = LIST_POISON1;
        WRITE_ONCE(ep->ovflist, NULL);
        write_unlock_irq(&ep->lock);

        /*
         * Now call the callback function.
         */
-       res = (*sproc)(ep, &txlist, priv);
+       res = (*sproc)(ep, &rdllist, priv);

        write_lock_irq(&ep->lock);
        /*
@@ -724,7 +732,7 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
                /*
                 * We need to check if the item is already in the list.                  * During the "sproc" callback execution time, items are -                * queued into ->ovflist but the "txlist" might already +                * queued into ->ovflist but the "rdllist" might already                  * contain them, and the list_splice() below takes care of them.
                 */
                if (!ep_is_linked(epi)) {
@@ -732,7 +740,7 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,                          * ->ovflist is LIFO, so we have to reverse it in order
                         * to keep in FIFO.
                         */
-                       list_add(&epi->rdllink, &ep->rdllist);
+                       list_add(&epi->rdllink, &ovflist);
                        ep_pm_stay_awake(epi);
                }
        }
@@ -743,10 +751,11 @@ static __poll_t ep_scan_ready_list(struct eventpoll *ep,
         */
        WRITE_ONCE(ep->ovflist, EP_UNACTIVE_PTR);

-       /*
-        * Quickly re-inject items left on "txlist".
-        */
-       list_splice(&txlist, &ep->rdllist);
+       /* Events from ->ovflist happened later, thus splice to the tail */
+       list_splice_tail(&ovflist, &rdllist);
+       /* Just replace list */
+       list_replace(&rdllist, &ep->rdllist);
+
        __pm_relax(ep->ws);
        write_unlock_irq(&ep->lock);

@@ -1763,13 +1772,13 @@ static __poll_t ep_send_events_proc(struct eventpoll *ep, struct list_head *head                          * Trigger mode, we need to insert back inside
                         * the ready list, so that the next call to
                         * epoll_wait() will check again the events
-                        * availability. At this point, no one can insert -                        * into ep->rdllist besides us. The epoll_ctl()
-                        * callers are locked out by
-                        * ep_scan_ready_list() holding "mtx" and the
-                        * poll callback will queue them in ep->ovflist.
+                        * availability. What we do here is simply
+                        * return the epi to the same position where
+                        * it was, the ep_scan_ready_list() will
+                        * re-inject the leftovers to the ->rdllist
+                        * under the proper lock.
                         */
-                       list_add_tail(&epi->rdllink, &ep->rdllist);
+                       list_add_tail(&epi->rdllink, &tmp->rdllink);
                        ep_pm_stay_awake(epi);
                }
        }


--
Roman



Hi Roman,

I think this misses an important case - the initial ep_poll_callback()
may queue to the overflow list. In this case ep_poll has no visibility
into the event since its only checking ep->rdllist.

Ok, my mistake - I see it sets: ep->rdllist.next = LIST_POISON1; for that
case. Ok I think this approach makes sense then.

Hi Jason,

I want also to emphasize, that the original behavior should not be changed (correct me if I'm wrong): callers of ep_events_available() will get false
positive (something is available, but under the lock when ->ovflist is
resolved, it turns out to be no events to harvest). This was always like
that and this is fine, since the final decision is made under the proper
lock.

(I speak it out loud to accurately cover all the cases).

I will take couple of days for testing and then send out a patch.
No objections on that?

--
Roman




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux