From: Jann Horn <jannh@xxxxxxxxxx> commit 7dbdb53d72a51cea9b921d9dbba54be00752212a upstream. This fixes a bug that causes the USB3 early console to freeze after printing a single line on AMD machines because it can't parse the Transfer TRB properly. The spec at https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf says in section "4.5.1 Device Context Index" that the Context Index, also known as Endpoint ID according to section "1.6 Terms and Abbreviations", is normally computed as `DCI = (Endpoint Number * 2) + Direction`, which matches the current definitions of XDBC_EPID_OUT and XDBC_EPID_IN. However, the numbering in a Debug Capability Context data structure is supposed to be different: Section "7.6.3.2 Endpoint Contexts and Transfer Rings" explains that a Debug Capability Context data structure has the endpoints mapped to indices 0 and 1. Change XDBC_EPID_OUT/XDBC_EPID_IN to the spec-compliant values, add XDBC_EPID_OUT_INTEL/XDBC_EPID_IN_INTEL with Intel's incorrect values, and let xdbc_handle_tx_event() handle both. I have verified that with this patch applied, the USB3 early console works on both an Intel and an AMD machine. Fixes: aeb9dd1de98c ("usb/early: Add driver for xhci debug capability") Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Jann Horn <jannh@xxxxxxxxxx> Link: https://lore.kernel.org/r/20200401074619.8024-1-jannh@xxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/early/xhci-dbc.c | 8 ++++---- drivers/usb/early/xhci-dbc.h | 18 ++++++++++++++++-- 2 files changed, 20 insertions(+), 6 deletions(-) --- a/drivers/usb/early/xhci-dbc.c +++ b/drivers/usb/early/xhci-dbc.c @@ -738,19 +738,19 @@ static void xdbc_handle_tx_event(struct case COMP_USB_TRANSACTION_ERROR: case COMP_STALL_ERROR: default: - if (ep_id == XDBC_EPID_OUT) + if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL) xdbc.flags |= XDBC_FLAGS_OUT_STALL; - if (ep_id == XDBC_EPID_IN) + if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL) xdbc.flags |= XDBC_FLAGS_IN_STALL; xdbc_trace("endpoint %d stalled\n", ep_id); break; } - if (ep_id == XDBC_EPID_IN) { + if (ep_id == XDBC_EPID_IN || ep_id == XDBC_EPID_IN_INTEL) { xdbc.flags &= ~XDBC_FLAGS_IN_PROCESS; xdbc_bulk_transfer(NULL, XDBC_MAX_PACKET, true); - } else if (ep_id == XDBC_EPID_OUT) { + } else if (ep_id == XDBC_EPID_OUT || ep_id == XDBC_EPID_OUT_INTEL) { xdbc.flags &= ~XDBC_FLAGS_OUT_PROCESS; } else { xdbc_trace("invalid endpoint id %d\n", ep_id); --- a/drivers/usb/early/xhci-dbc.h +++ b/drivers/usb/early/xhci-dbc.h @@ -123,8 +123,22 @@ struct xdbc_ring { u32 cycle_state; }; -#define XDBC_EPID_OUT 2 -#define XDBC_EPID_IN 3 +/* + * These are the "Endpoint ID" (also known as "Context Index") values for the + * OUT Transfer Ring and the IN Transfer Ring of a Debug Capability Context data + * structure. + * According to the "eXtensible Host Controller Interface for Universal Serial + * Bus (xHCI)" specification, section "7.6.3.2 Endpoint Contexts and Transfer + * Rings", these should be 0 and 1, and those are the values AMD machines give + * you; but Intel machines seem to use the formula from section "4.5.1 Device + * Context Index", which is supposed to be used for the Device Context only. + * Luckily the values from Intel don't overlap with those from AMD, so we can + * just test for both. + */ +#define XDBC_EPID_OUT 0 +#define XDBC_EPID_IN 1 +#define XDBC_EPID_OUT_INTEL 2 +#define XDBC_EPID_IN_INTEL 3 struct xdbc_state { u16 vendor;
