From: Alexander Tsoy <alexander@xxxxxxx> commit 1c826792586f526a5a5cd21d55aad388f5bb0b23 upstream. Many Focusrite devices supports a limited set of sample rates per altsetting. These includes audio interfaces with ADAT ports: - Scarlett 18i6, 18i8 1st gen, 18i20 1st gen; - Scarlett 18i8 2nd gen, 18i20 2nd gen; - Scarlett 18i8 3rd gen, 18i20 3rd gen; - Clarett 2Pre USB, 4Pre USB, 8Pre USB. Maximum rate is exposed in the last 4 bytes of Format Type descriptor which has a non-standard bLength = 10. Tested-by: Alexey Skobkin <skobkin-ru@xxxxx> Signed-off-by: Alexander Tsoy <alexander@xxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20200418175815.12211-1-alexander@xxxxxxx Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- sound/usb/format.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -221,6 +221,52 @@ static int parse_audio_format_rates_v1(s } /* + * Many Focusrite devices supports a limited set of sampling rates per + * altsetting. Maximum rate is exposed in the last 4 bytes of Format Type + * descriptor which has a non-standard bLength = 10. + */ +static bool focusrite_valid_sample_rate(struct snd_usb_audio *chip, + struct audioformat *fp, + unsigned int rate) +{ + struct usb_interface *iface; + struct usb_host_interface *alts; + unsigned char *fmt; + unsigned int max_rate; + + iface = usb_ifnum_to_if(chip->dev, fp->iface); + if (!iface) + return true; + + alts = &iface->altsetting[fp->altset_idx]; + fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, + NULL, UAC_FORMAT_TYPE); + if (!fmt) + return true; + + if (fmt[0] == 10) { /* bLength */ + max_rate = combine_quad(&fmt[6]); + + /* Validate max rate */ + if (max_rate != 48000 && + max_rate != 96000 && + max_rate != 192000 && + max_rate != 384000) { + + usb_audio_info(chip, + "%u:%d : unexpected max rate: %u\n", + fp->iface, fp->altsetting, max_rate); + + return true; + } + + return rate <= max_rate; + } + + return true; +} + +/* * Helper function to walk the array of sample rate triplets reported by * the device. The problem is that we need to parse whole array first to * get to know how many sample rates we have to expect. @@ -256,6 +302,11 @@ static int parse_uac2_sample_rate_range( } for (rate = min; rate <= max; rate += res) { + /* Filter out invalid rates on Focusrite devices */ + if (USB_ID_VENDOR(chip->usb_id) == 0x1235 && + !focusrite_valid_sample_rate(chip, fp, rate)) + goto skip_rate; + if (fp->rate_table) fp->rate_table[nr_rates] = rate; if (!fp->rate_min || rate < fp->rate_min) @@ -270,6 +321,7 @@ static int parse_uac2_sample_rate_range( break; } +skip_rate: /* avoid endless loop */ if (res == 0) break;
