From: Julien Beraud <julien.beraud@xxxxxxxxxx>
[ Upstream commit 15ce30609d1e88d42fb1cd948f453e6d5f188249 ]
There are 2 registers to write to enable a ptp ref clock coming from the
fpga.
One that enables the usage of the clock from the fpga for emac0 and emac1
as a ptp ref clock, and the other to allow signals from the fpga to reach
emac0 and emac1.
Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII,
PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will
be written and the ptp ref clock will be set as coming from the fpga.
Separate the 2 register writes to only enable signals from the fpga to
reach emac0 or emac1 when ptp ref clock is not coming from the fpga.
Signed-off-by: Julien Beraud <julien.beraud@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index e0212d2fc2a12..b7087245af26a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -289,16 +289,19 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
phymode == PHY_INTERFACE_MODE_MII ||
phymode == PHY_INTERFACE_MODE_GMII ||
phymode == PHY_INTERFACE_MODE_SGMII) {
- ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
&module);
module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
module);
- } else {
- ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
}
+ if (dwmac->f2h_ptp_ref_clk)
+ ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
+ else
+ ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
+ (reg_shift / 2));
+
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
/* Deassert reset for the phy configuration to be sampled by
--
2.20.1
