[PATCH AUTOSEL 5.6 30/38] i2c: tegra: Better handle case where CPU0 is busy for a long time

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dmitry Osipenko <digetx@xxxxxxxxx>

[ Upstream commit a900aeac253729411cf33c6cb598c152e9e4137f ]

Boot CPU0 always handle I2C interrupt and under some rare circumstances
(like running KASAN + NFS root) it may stuck in uninterruptible state for
a significant time. In this case we will get timeout if I2C transfer is
running on a sibling CPU, despite of IRQ being raised. In order to handle
this rare condition, the IRQ status needs to be checked after completion
timeout.

Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-tegra.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index cbc2ad49043e4..0daa863fb26f2 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1000,14 +1000,13 @@ tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 	do {
 		u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
-		if (status) {
+		if (status)
 			tegra_i2c_isr(i2c_dev->irq, i2c_dev);
 
-			if (completion_done(complete)) {
-				s64 delta = ktime_ms_delta(ktimeout, ktime);
+		if (completion_done(complete)) {
+			s64 delta = ktime_ms_delta(ktimeout, ktime);
 
-				return msecs_to_jiffies(delta) ?: 1;
-			}
+			return msecs_to_jiffies(delta) ?: 1;
 		}
 
 		ktime = ktime_get();
@@ -1034,14 +1033,18 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 		disable_irq(i2c_dev->irq);
 
 		/*
-		 * There is a chance that completion may happen after IRQ
-		 * synchronization, which is done by disable_irq().
+		 * Under some rare circumstances (like running KASAN +
+		 * NFS root) CPU, which handles interrupt, may stuck in
+		 * uninterruptible state for a significant time.  In this
+		 * case we will get timeout if I2C transfer is running on
+		 * a sibling CPU, despite of IRQ being raised.
+		 *
+		 * In order to handle this rare condition, the IRQ status
+		 * needs to be checked after timeout.
 		 */
-		if (ret == 0 && completion_done(complete)) {
-			dev_warn(i2c_dev->dev,
-				 "completion done after timeout\n");
-			ret = 1;
-		}
+		if (ret == 0)
+			ret = tegra_i2c_poll_completion_timeout(i2c_dev,
+								complete, 0);
 	}
 
 	return ret;
-- 
2.20.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux