From: Benoit Parrot <bparrot@xxxxxx>
commit 1db56284b9da9056093681f28db48a09a243274b upstream.
disable_irqs() was mistakenly disabling all interrupts when called.
This cause all port stream to stop even if only stopping one of them.
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/platform/ti-vpe/cal.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -544,16 +544,16 @@ static void enable_irqs(struct cal_ctx *
static void disable_irqs(struct cal_ctx *ctx)
{
+ u32 val;
+
/* Disable IRQ_WDMA_END 0/1 */
- reg_write_field(ctx->dev,
- CAL_HL_IRQENABLE_CLR(2),
- CAL_HL_IRQ_CLEAR,
- CAL_HL_IRQ_MASK(ctx->csi2_port));
+ val = 0;
+ set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+ reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(2), val);
/* Disable IRQ_WDMA_START 0/1 */
- reg_write_field(ctx->dev,
- CAL_HL_IRQENABLE_CLR(3),
- CAL_HL_IRQ_CLEAR,
- CAL_HL_IRQ_MASK(ctx->csi2_port));
+ val = 0;
+ set_field(&val, CAL_HL_IRQ_CLEAR, CAL_HL_IRQ_MASK(ctx->csi2_port));
+ reg_write(ctx->dev, CAL_HL_IRQENABLE_CLR(3), val);
/* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
}
