From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> commit 5e5caf4fa8d3039140b4548b6ab23dd17fce9b2c upstream. Different configuration/condition may draw different power. Inform the controller driver of the change so it can respond properly (e.g. GET_STATUS request). This fixes an issue with setting MaxPower from configfs. The composite driver doesn't check this value when setting self-powered. Cc: stable@xxxxxxxxxxxxxxx Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface") Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx> Signed-off-by: Felipe Balbi <balbi@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/gadget/composite.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -842,6 +842,11 @@ static int set_config(struct usb_composi else power = min(power, 900U); done: + if (power <= USB_SELF_POWER_VBUS_MAX_DRAW) + usb_gadget_set_selfpowered(gadget); + else + usb_gadget_clear_selfpowered(gadget); + usb_gadget_vbus_draw(gadget, power); if (result >= 0 && cdev->delayed_status) result = USB_GADGET_DELAYED_STATUS; @@ -2273,6 +2278,7 @@ void composite_suspend(struct usb_gadget cdev->suspended = 1; + usb_gadget_set_selfpowered(gadget); usb_gadget_vbus_draw(gadget, 2); } @@ -2301,6 +2307,9 @@ void composite_resume(struct usb_gadget else maxpower = min(maxpower, 900U); + if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW) + usb_gadget_clear_selfpowered(gadget); + usb_gadget_vbus_draw(gadget, maxpower); }