[PATCH 4.19 38/40] wil6210: make sure Rx ring sizes are correlated

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dedy Lansky <dlansky@xxxxxxxxxxxxxx>

commit 61e5ec044748486f06dec760a19dce78247b3ad8 upstream.

When enlarging rx_ring_order module param, wil6210 fails to load
because there are not enough Rx buffers.
Fix this by enlarging number of Rx buffers at startup, if needed based
on rx_ring_order.

Signed-off-by: Dedy Lansky <dlansky@xxxxxxxxxxxxxx>
Signed-off-by: Maya Erez <merez@xxxxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/wil6210/main.c      |    2 +-
 drivers/net/wireless/ath/wil6210/txrx.c      |    4 ++--
 drivers/net/wireless/ath/wil6210/txrx_edma.c |   11 ++++++++---
 drivers/net/wireless/ath/wil6210/wil6210.h   |    2 +-
 4 files changed, 12 insertions(+), 7 deletions(-)

--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1687,7 +1687,7 @@ int __wil_up(struct wil6210_priv *wil)
 		return rc;
 
 	/* Rx RING. After MAC and beacon */
-	rc = wil->txrx_ops.rx_init(wil, 1 << rx_ring_order);
+	rc = wil->txrx_ops.rx_init(wil, rx_ring_order);
 	if (rc)
 		return rc;
 
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -881,7 +881,7 @@ static void wil_rx_buf_len_init(struct w
 	}
 }
 
-static int wil_rx_init(struct wil6210_priv *wil, u16 size)
+static int wil_rx_init(struct wil6210_priv *wil, uint order)
 {
 	struct wil_ring *vring = &wil->ring_rx;
 	int rc;
@@ -895,7 +895,7 @@ static int wil_rx_init(struct wil6210_pr
 
 	wil_rx_buf_len_init(wil);
 
-	vring->size = size;
+	vring->size = 1 << order;
 	vring->is_rx = true;
 	rc = wil_vring_alloc(wil, vring);
 	if (rc)
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -593,9 +593,9 @@ static void wil_rx_buf_len_init_edma(str
 		WIL_MAX_ETH_MTU : WIL_EDMA_RX_BUF_LEN_DEFAULT;
 }
 
-static int wil_rx_init_edma(struct wil6210_priv *wil, u16 desc_ring_size)
+static int wil_rx_init_edma(struct wil6210_priv *wil, uint desc_ring_order)
 {
-	u16 status_ring_size;
+	u16 status_ring_size, desc_ring_size = 1 << desc_ring_order;
 	struct wil_ring *ring = &wil->ring_rx;
 	int rc;
 	size_t elem_size = wil->use_compressed_rx_status ?
@@ -610,7 +610,12 @@ static int wil_rx_init_edma(struct wil62
 			"compressed RX status cannot be used with SW reorder\n");
 		return -EINVAL;
 	}
-
+	if (wil->rx_status_ring_order <= desc_ring_order)
+		/* make sure sring is larger than desc ring */
+		wil->rx_status_ring_order = desc_ring_order + 1;
+	if (wil->rx_buff_id_count <= desc_ring_size)
+		/* make sure we will not run out of buff_ids */
+		wil->rx_buff_id_count = desc_ring_size + 512;
 	if (wil->rx_status_ring_order < WIL_SRING_SIZE_ORDER_MIN ||
 	    wil->rx_status_ring_order > WIL_SRING_SIZE_ORDER_MAX)
 		wil->rx_status_ring_order = WIL_RX_SRING_SIZE_ORDER_DEFAULT;
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -602,7 +602,7 @@ struct wil_txrx_ops {
 			   struct wil_ring *ring, struct sk_buff *skb);
 	irqreturn_t (*irq_tx)(int irq, void *cookie);
 	/* RX ops */
-	int (*rx_init)(struct wil6210_priv *wil, u16 ring_size);
+	int (*rx_init)(struct wil6210_priv *wil, uint ring_order);
 	void (*rx_fini)(struct wil6210_priv *wil);
 	int (*wmi_addba_rx_resp)(struct wil6210_priv *wil, u8 mid, u8 cid,
 				 u8 tid, u8 token, u16 status, bool amsdu,





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux