"usb-nop-xceiv" is good enough if we don't lose the configuration done
by the firmware, but we'd really prefer a real driver.
Unfortunately, the PHY core is odd in that when the node is compatible
with "usb-nop-xceiv", it ignores the other compatible strings. Let's
just remove it.
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/mmp3.dtsi | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index ae264af12c287..f97fb64404659 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -202,8 +202,7 @@ usb_otg0: usb@d4208000 {
};
hsic_phy0: usb-phy@f0001800 {
- compatible = "marvell,mmp3-hsic-phy",
- "usb-nop-xceiv";
+ compatible = "marvell,mmp3-hsic-phy";
reg = <0xf0001800 0x40>;
#phy-cells = <0>;
status = "disabled";
@@ -224,8 +223,7 @@ hsic0: usb@f0001000 {
};
hsic_phy1: usb-phy@f0002800 {
- compatible = "marvell,mmp3-hsic-phy",
- "usb-nop-xceiv";
+ compatible = "marvell,mmp3-hsic-phy";
reg = <0xf0002800 0x40>;
#phy-cells = <0>;
status = "disabled";
--
2.26.0
