From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
commit 5e5caf4fa8d3039140b4548b6ab23dd17fce9b2c upstream.
Different configuration/condition may draw different power. Inform the
controller driver of the change so it can respond properly (e.g.
GET_STATUS request). This fixes an issue with setting MaxPower from
configfs. The composite driver doesn't check this value when setting
self-powered.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/gadget/composite.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -861,6 +861,11 @@ static int set_config(struct usb_composi
else
power = min(power, 900U);
done:
+ if (power <= USB_SELF_POWER_VBUS_MAX_DRAW)
+ usb_gadget_set_selfpowered(gadget);
+ else
+ usb_gadget_clear_selfpowered(gadget);
+
usb_gadget_vbus_draw(gadget, power);
if (result >= 0 && cdev->delayed_status)
result = USB_GADGET_DELAYED_STATUS;
@@ -2279,6 +2284,7 @@ void composite_suspend(struct usb_gadget
cdev->suspended = 1;
+ usb_gadget_set_selfpowered(gadget);
usb_gadget_vbus_draw(gadget, 2);
}
@@ -2307,6 +2313,9 @@ void composite_resume(struct usb_gadget
else
maxpower = min(maxpower, 900U);
+ if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW)
+ usb_gadget_clear_selfpowered(gadget);
+
usb_gadget_vbus_draw(gadget, maxpower);
}
