Re: [PATCH] i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 7, 2020 at 8:11 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
>
> We already set DPM_FLAG_SMART_PREPARE, so we completely skip all
> callbacks (other then prepare) where possible, quoting from
> dw_i2c_plat_prepare():
>
>         /*
>          * If the ACPI companion device object is present for this device, it
>          * may be accessed during suspend and resume of other devices via I2C
>          * operation regions, so tell the PM core and middle layers to avoid
>          * skipping system suspend/resume callbacks for it in that case.
>          */
>         return !has_acpi_companion(dev);
>
> Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend()
> to leave the controller runtime-suspended even if dw_i2c_plat_prepare()
> returned 0.
>
> Leaving the controller runtime-suspended normally, when the I2C controller
> is suspended during the suspend_late phase, is not an issue because
> the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it.
>
> But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c
> leaves the controller alive until the suspend_noirq phase, because it may
> be used by the _PS3 ACPI methods of PCI devices and PCI devices are left
> powered on until the suspend_noirq phase.
>
> Between the suspend_late and resume_early phases runtime-pm is disabled.
> So for any ACPI I2C OPRegion accesses done after the suspend_late phase,
> the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the
> controller is left runtime-suspended.
>
> i2c_dw_xfer() has a check to catch this condition (rather then waiting
> for the I2C transfer to timeout because the controller is suspended).
> acpi_subsys_suspend() leaving the controller runtime-suspended in
> combination with an ACPI I2C OPRegion access done after the suspend_late
> phase triggers this check, leading to the following error being logged
> on a Bay Trail based Lenovo Thinkpad 8 tablet:
>
> [   93.275882] i2c_designware 80860F41:00: Transfer while suspended
> [   93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280
> ...
> [   93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred
> [   93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280
> ...
> [   93.276340] Call Trace:
> [   93.276366]  __i2c_transfer+0x121/0x520
> [   93.276379]  i2c_transfer+0x4c/0x100
> [   93.276392]  i2c_acpi_space_handler+0x219/0x510
> [   93.276408]  ? up+0x40/0x60
> [   93.276419]  ? i2c_acpi_notify+0x130/0x130
> [   93.276433]  acpi_ev_address_space_dispatch+0x1e1/0x252
> ...
>
> So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses
> to work until the suspend_noirq phase, we need the controller to be
> runtime-resumed during the suspend phase if it is runtime-suspended
> suspended at that time. This means that we must not set the
> DPM_FLAG_SMART_SUSPEND on these platforms.
>
> On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag
> to make sure the controller stays functional until the suspend_noirq
> phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND
> flag when that flag is set.

OK

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: b30f2f65568f ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers")
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-designware-platdrv.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 3b7d58c2fe85..15b4b965b443 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -371,10 +371,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
>         adap->dev.of_node = pdev->dev.of_node;
>         adap->nr = -1;
>
> -       dev_pm_set_driver_flags(&pdev->dev,
> -                               DPM_FLAG_SMART_PREPARE |
> -                               DPM_FLAG_SMART_SUSPEND |
> -                               DPM_FLAG_LEAVE_SUSPENDED);
> +       if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
> +               dev_pm_set_driver_flags(&pdev->dev,
> +                                       DPM_FLAG_SMART_PREPARE |
> +                                       DPM_FLAG_LEAVE_SUSPENDED);
> +       } else {
> +               dev_pm_set_driver_flags(&pdev->dev,
> +                                       DPM_FLAG_SMART_PREPARE |
> +                                       DPM_FLAG_SMART_SUSPEND |
> +                                       DPM_FLAG_LEAVE_SUSPENDED);
> +       }
>
>         /* The code below assumes runtime PM to be disabled. */
>         WARN_ON(pm_runtime_enabled(&pdev->dev));
> --
> 2.26.0
>



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux