The patch ASoC: cs4270: pull reset GPIO low then high has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From ccfc531695f3a4aada042f6bdb33ac6be24e1aec Mon Sep 17 00:00:00 2001 From: Mike Willard <mwillard@xxxxxxxxxxx> Date: Wed, 1 Apr 2020 20:54:54 +0000 Subject: [PATCH] ASoC: cs4270: pull reset GPIO low then high Pull the RST line low then high when initializing the driver, in order to force a reset of the chip. Previously, the line was not pulled low, which could result in the chip registers not resetting to their default values on boot. Signed-off-by: Mike Willard <mwillard@xxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Link: https://lore.kernel.org/r/20200401205454.79792-1-mwillard@xxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- sound/soc/codecs/cs4270.c | 40 ++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 5f25b9f872bd..8a02791e44ad 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -137,6 +137,9 @@ struct cs4270_private { /* power domain regulators */ struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; + + /* reset gpio */ + struct gpio_desc *reset_gpio; }; static const struct snd_soc_dapm_widget cs4270_dapm_widgets[] = { @@ -648,6 +651,22 @@ static const struct regmap_config cs4270_regmap = { .volatile_reg = cs4270_reg_is_volatile, }; +/** + * cs4270_i2c_remove - deinitialize the I2C interface of the CS4270 + * @i2c_client: the I2C client object + * + * This function puts the chip into low power mode when the i2c device + * is removed. + */ +static int cs4270_i2c_remove(struct i2c_client *i2c_client) +{ + struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client); + + gpiod_set_value_cansleep(cs4270->reset_gpio, 0); + + return 0; +} + /** * cs4270_i2c_probe - initialize the I2C interface of the CS4270 * @i2c_client: the I2C client object @@ -660,7 +679,6 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, const struct i2c_device_id *id) { struct cs4270_private *cs4270; - struct gpio_desc *reset_gpiod; unsigned int val; int ret, i; @@ -679,10 +697,21 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, if (ret < 0) return ret; - reset_gpiod = devm_gpiod_get_optional(&i2c_client->dev, "reset", - GPIOD_OUT_HIGH); - if (PTR_ERR(reset_gpiod) == -EPROBE_DEFER) - return -EPROBE_DEFER; + /* reset the device */ + cs4270->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(cs4270->reset_gpio)) { + dev_dbg(&i2c_client->dev, "Error getting CS4270 reset GPIO\n"); + return PTR_ERR(cs4270->reset_gpio); + } + + if (cs4270->reset_gpio) { + dev_dbg(&i2c_client->dev, "Found reset GPIO\n"); + gpiod_set_value_cansleep(cs4270->reset_gpio, 1); + } + + /* Sleep 500ns before i2c communications */ + ndelay(500); cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap); if (IS_ERR(cs4270->regmap)) @@ -735,6 +764,7 @@ static struct i2c_driver cs4270_i2c_driver = { }, .id_table = cs4270_id, .probe = cs4270_i2c_probe, + .remove = cs4270_i2c_remove, }; module_i2c_driver(cs4270_i2c_driver); -- 2.20.1
