The patch below does not apply to the 3.13-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 947166043732b69878123bf31f51933ad0316080 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@xxxxxxxxxxxxxxxxxx>
Date: Tue, 25 Feb 2014 15:28:37 +0800
Subject: [PATCH] powerpc/powernv: Dump PHB diag-data immediately
The PHB diag-data is important to help locating the root cause for
EEH errors such as frozen PE or fenced PHB. However, the EEH core
enables IO path by clearing part of HW registers before collecting
this data causing it to be corrupted.
This patch fixes this by dumping the PHB diag-data immediately when
frozen/fenced state on PE or PHB is detected for the first time in
eeh_ops::get_state() or next_error() backend.
Signed-off-by: Gavin Shan <shangw@xxxxxxxxxxxxxxxxxx>
CC: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index f51474336460..253fefe3d1a0 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -114,6 +114,7 @@ DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_inbB_dbgfs_ops, ioda_eeh_inbB_dbgfs_get,
ioda_eeh_inbB_dbgfs_set, "0x%llx\n");
#endif /* CONFIG_DEBUG_FS */
+
/**
* ioda_eeh_post_init - Chip dependent post initialization
* @hose: PCI controller
@@ -221,6 +222,22 @@ static int ioda_eeh_set_option(struct eeh_pe *pe, int option)
return ret;
}
+static void ioda_eeh_phb_diag(struct pci_controller *hose)
+{
+ struct pnv_phb *phb = hose->private_data;
+ long rc;
+
+ rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
+ PNV_PCI_DIAG_BUF_SIZE);
+ if (rc != OPAL_SUCCESS) {
+ pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n",
+ __func__, hose->global_number, rc);
+ return;
+ }
+
+ pnv_pci_dump_phb_diag_data(hose, phb->diag.blob);
+}
+
/**
* ioda_eeh_get_state - Retrieve the state of PE
* @pe: EEH PE
@@ -272,6 +289,9 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
result |= EEH_STATE_DMA_ACTIVE;
result |= EEH_STATE_MMIO_ENABLED;
result |= EEH_STATE_DMA_ENABLED;
+ } else if (!(pe->state & EEH_PE_ISOLATED)) {
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+ ioda_eeh_phb_diag(hose);
}
return result;
@@ -315,6 +335,15 @@ static int ioda_eeh_get_state(struct eeh_pe *pe)
__func__, fstate, hose->global_number, pe_no);
}
+ /* Dump PHB diag-data for frozen PE */
+ if (result != EEH_STATE_NOT_SUPPORT &&
+ (result & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) !=
+ (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE) &&
+ !(pe->state & EEH_PE_ISOLATED)) {
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
+ ioda_eeh_phb_diag(hose);
+ }
+
return result;
}
@@ -530,42 +559,6 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
}
/**
- * ioda_eeh_get_log - Retrieve error log
- * @pe: EEH PE
- * @severity: Severity level of the log
- * @drv_log: buffer to store the log
- * @len: space of the log buffer
- *
- * The function is used to retrieve error log from P7IOC.
- */
-static int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
- char *drv_log, unsigned long len)
-{
- s64 ret;
- unsigned long flags;
- struct pci_controller *hose = pe->phb;
- struct pnv_phb *phb = hose->private_data;
-
- spin_lock_irqsave(&phb->lock, flags);
-
- ret = opal_pci_get_phb_diag_data2(phb->opal_id,
- phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
- if (ret) {
- spin_unlock_irqrestore(&phb->lock, flags);
- pr_warning("%s: Can't get log for PHB#%x-PE#%x (%lld)\n",
- __func__, hose->global_number, pe->addr, ret);
- return -EIO;
- }
-
- /* The PHB diag-data is always indicative */
- pnv_pci_dump_phb_diag_data(hose, phb->diag.blob);
-
- spin_unlock_irqrestore(&phb->lock, flags);
-
- return 0;
-}
-
-/**
* ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE
* @pe: EEH PE
*
@@ -646,22 +639,6 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose)
}
}
-static void ioda_eeh_phb_diag(struct pci_controller *hose)
-{
- struct pnv_phb *phb = hose->private_data;
- long rc;
-
- rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob,
- PNV_PCI_DIAG_BUF_SIZE);
- if (rc != OPAL_SUCCESS) {
- pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n",
- __func__, hose->global_number, rc);
- return;
- }
-
- pnv_pci_dump_phb_diag_data(hose, phb->diag.blob);
-}
-
static int ioda_eeh_get_phb_pe(struct pci_controller *hose,
struct eeh_pe **pe)
{
@@ -835,6 +812,20 @@ static int ioda_eeh_next_error(struct eeh_pe **pe)
}
/*
+ * EEH core will try recover from fenced PHB or
+ * frozen PE. In the time for frozen PE, EEH core
+ * enable IO path for that before collecting logs,
+ * but it ruins the site. So we have to dump the
+ * log in advance here.
+ */
+ if ((ret == EEH_NEXT_ERR_FROZEN_PE ||
+ ret == EEH_NEXT_ERR_FENCED_PHB) &&
+ !((*pe)->state & EEH_PE_ISOLATED)) {
+ eeh_pe_state_mark(*pe, EEH_PE_ISOLATED);
+ ioda_eeh_phb_diag(hose);
+ }
+
+ /*
* If we have no errors on the specific PHB or only
* informative error there, we continue poking it.
* Otherwise, we need actions to be taken by upper
@@ -852,7 +843,6 @@ struct pnv_eeh_ops ioda_eeh_ops = {
.set_option = ioda_eeh_set_option,
.get_state = ioda_eeh_get_state,
.reset = ioda_eeh_reset,
- .get_log = ioda_eeh_get_log,
.configure_bridge = ioda_eeh_configure_bridge,
.next_error = ioda_eeh_next_error
};
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html