From: Johan Hovold <johan@xxxxxxxxxx>
commit 485b06aadb933190f4bc44e006076bc27a23f205 upstream.
Make sure to check that we have two alternate settings and at least one
endpoint before accessing the second altsetting structure and
dereferencing the endpoint arrays.
This specifically avoids dereferencing NULL-pointers or corrupting
memory when a device does not have the expected descriptors.
Note that the sanity checks in stv06xx_start() and pb0100_start() are
not redundant as the driver is mixing looking up altsettings by index
and by number, which may not coincide.
Fixes: 8668d504d72c ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor")
Fixes: c0b33bdc5b8d ("[media] gspca-stv06xx: support bandwidth changing")
Cc: stable <stable@xxxxxxxxxxxxxxx> # 2.6.31
Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/usb/gspca/stv06xx/stv06xx.c | 19 ++++++++++++++++++-
drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c | 4 ++++
2 files changed, 22 insertions(+), 1 deletion(-)
--- a/drivers/media/usb/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c
@@ -293,6 +293,9 @@ static int stv06xx_start(struct gspca_de
return -EIO;
}
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
if (err < 0)
@@ -317,11 +320,21 @@ out:
static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
{
+ struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
struct sd *sd = (struct sd *) gspca_dev;
+ intfc = gspca_dev->dev->actconfig->intf_cache[0];
+
+ if (intfc->num_altsetting < 2)
+ return -ENODEV;
+
+ alt = &intfc->altsetting[1];
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
- alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
alt->endpoint[0].desc.wMaxPacketSize =
cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
@@ -334,6 +347,10 @@ static int stv06xx_isoc_nego(struct gspc
struct usb_host_interface *alt;
struct sd *sd = (struct sd *) gspca_dev;
+ /*
+ * Existence of altsetting and endpoint was verified in
+ * stv06xx_isoc_init()
+ */
alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1];
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
--- a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
+++ b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c
@@ -198,6 +198,10 @@ static int pb0100_start(struct sd *sd)
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
if (!alt)
return -ENODEV;
+
+ if (alt->desc.bNumEndpoints < 1)
+ return -ENODEV;
+
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
/* If we don't have enough bandwidth use a lower framerate */
