From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
commit 29e8c8253d7d5265f58122c0a7902e26df6c6f61 upstream.
Master mode should be disabled when stopping. This mainly impacts
possible other use-case after timer has been stopped. Currently,
master mode remains set (from start routine).
Fixes: 6fb34812c2a2 ("iio: stm32 trigger: Add support for TRGO2 triggers")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
Cc: <Stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/iio/trigger/stm32-timer-trigger.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/iio/trigger/stm32-timer-trigger.c
+++ b/drivers/iio/trigger/stm32-timer-trigger.c
@@ -161,7 +161,8 @@ static int stm32_timer_start(struct stm3
return 0;
}
-static void stm32_timer_stop(struct stm32_timer_trigger *priv)
+static void stm32_timer_stop(struct stm32_timer_trigger *priv,
+ struct iio_trigger *trig)
{
u32 ccer, cr1;
@@ -179,6 +180,12 @@ static void stm32_timer_stop(struct stm3
regmap_write(priv->regmap, TIM_PSC, 0);
regmap_write(priv->regmap, TIM_ARR, 0);
+ /* Force disable master mode */
+ if (stm32_timer_is_trgo2_name(trig->name))
+ regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, 0);
+ else
+ regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0);
+
/* Make sure that registers are updated */
regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
}
@@ -197,7 +204,7 @@ static ssize_t stm32_tt_store_frequency(
return ret;
if (freq == 0) {
- stm32_timer_stop(priv);
+ stm32_timer_stop(priv, trig);
} else {
ret = stm32_timer_start(priv, trig, freq);
if (ret)
