From: Grygorii Strashko <grygorii.strashko@xxxxxx> [ Upstream commit eefed634eb61e4094b9fb8183cb8d43b26838517 ] - under PHY_INTERFACE_MODE_MII the 'mode' func parameter is assigned instead of 'gmii_sel_mode' and it's working only because the default value 'gmii_sel_mode' is set to 0. - console outputs use 'rgmii_id' and 'mode' values to print PHY mode instead of using 'submode' value which is representing PHY interface mode now. This patch fixes above two cases. Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/phy/ti/phy-gmii-sel.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c index a28bd15297f53..e998e9cd8d1f8 100644 --- a/drivers/phy/ti/phy-gmii-sel.c +++ b/drivers/phy/ti/phy-gmii-sel.c @@ -80,20 +80,19 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode) break; case PHY_INTERFACE_MODE_MII: - mode = AM33XX_GMII_SEL_MODE_MII; + gmii_sel_mode = AM33XX_GMII_SEL_MODE_MII; break; default: - dev_warn(dev, - "port%u: unsupported mode: \"%s\". Defaulting to MII.\n", - if_phy->id, phy_modes(rgmii_id)); + dev_warn(dev, "port%u: unsupported mode: \"%s\"\n", + if_phy->id, phy_modes(submode)); return -EINVAL; } if_phy->phy_if_mode = submode; dev_dbg(dev, "%s id:%u mode:%u rgmii_id:%d rmii_clk_ext:%d\n", - __func__, if_phy->id, mode, rgmii_id, + __func__, if_phy->id, submode, rgmii_id, if_phy->rmii_clock_external); regfield = if_phy->fields[PHY_GMII_SEL_PORT_MODE]; -- 2.20.1
