From: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
commit 31e43f31890ca6e909b27dcb539252b46aa465da upstream.
Enable MSI interrupt for GL9750/GL9755. Some platforms
do not support PCI INTx and devices can not work without
interrupt. Like messages below:
[ 4.487132] sdhci-pci 0000:01:00.0: SDHCI controller found [17a0:9755] (rev 0)
[ 4.487198] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.PBR2._PRT.APS2], AE_NOT_FOUND (20190816/psargs-330)
[ 4.487397] ACPI Error: Aborting method \_SB.PCI0.PBR2._PRT due to previous error (AE_NOT_FOUND) (20190816/psparse-529)
[ 4.487707] pcieport 0000:00:01.3: can't derive routing for PCI INT A
[ 4.487709] sdhci-pci 0000:01:00.0: PCI INT A: no GSI
Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
Tested-by: Raul E Rangel <rrangel@xxxxxxxxxxxx>
Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20200219092900.9151-1-benchuanggli@xxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-pci-gli.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -262,10 +262,26 @@ static int gl9750_execute_tuning(struct
return 0;
}
+static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot)
+{
+ int ret;
+
+ ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1,
+ PCI_IRQ_MSI | PCI_IRQ_MSIX);
+ if (ret < 0) {
+ pr_warn("%s: enable PCI MSI failed, error=%d\n",
+ mmc_hostname(slot->host->mmc), ret);
+ return;
+ }
+
+ slot->host->irq = pci_irq_vector(slot->chip->pdev, 0);
+}
+
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
+ gli_pcie_enable_msi(slot);
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
@@ -276,6 +292,7 @@ static int gli_probe_slot_gl9755(struct
{
struct sdhci_host *host = slot->host;
+ gli_pcie_enable_msi(slot);
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
