The patch below does not apply to the 5.5-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 055e04830d4544c57f2a5192a26c9e25915c29c0 Mon Sep 17 00:00:00 2001 From: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Date: Tue, 10 Mar 2020 15:05:02 +0100 Subject: [PATCH] mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY It has turned out that the sdhci-omap controller requires the R1B response, for commands that has this response associated with them. So, converting from an R1B to an R1 response for a CMD6 for example, leads to problems with the HW busy detection support. Fix this by informing the mmc core about the requirement, via setting the host cap, MMC_CAP_NEED_RSP_BUSY. Reported-by: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx> Reported-by: Anders Roxell <anders.roxell@xxxxxxxxxx> Reported-by: Faiz Abbas <faiz_abbas@xxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> Tested-by: Anders Roxell <anders.roxell@xxxxxxxxxx> Tested-by: Faiz Abbas <faiz_abbas@xxxxxx> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c index 882053151a47..c4978177ef88 100644 --- a/drivers/mmc/host/sdhci-omap.c +++ b/drivers/mmc/host/sdhci-omap.c @@ -1192,6 +1192,9 @@ static int sdhci_omap_probe(struct platform_device *pdev) if (of_find_property(dev->of_node, "dmas", NULL)) sdhci_switch_external_dma(host, true); + /* R1B responses is required to properly manage HW busy detection. */ + mmc->caps |= MMC_CAP_NEED_RSP_BUSY; + ret = sdhci_setup_host(host); if (ret) goto err_put_sync;
