From: Kishon Vijay Abraham I <kishon@xxxxxx> [ Upstream commit 27f13774654ea6bd0b6fc9b97cce8d19e5735661 ] 'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI devices not described in the DT. Certain DRA7 platforms (e.g., DRA76) has RAM above 32-bit boundary (accessible with LPAE config) though the PCIe bridge will be able to access only 32-bits. Add 'dma-ranges' property in PCIe RC DT nodes to indicate the host bridge can access only 32 bits. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/dra7.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index fec965009b9fc..a40a7af85d020 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -302,6 +302,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; @@ -356,6 +357,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + dma-ranges = <0x02000000 0x0 0x00000000 0x00000000 0x1 0x00000000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; -- 2.20.1
