From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
commit 1f8b39bc99a31759e97a0428a5c3f64802c1e61d upstream.
Reviewing a fresh portion of coverity defects in USB core
(specifically CID 1458999), Alan Stern noted below in [1]:
On Tue, Feb 25, 2020 at 02:39:23PM -0500, Alan Stern wrote:
> A revised search finds line 997 in drivers/usb/core/hub.c and lines
> 216, 269 in drivers/usb/core/port.c. (I didn't try looking in any
> other directories.) AFAICT all three of these should check the
> return value, although a error message in the kernel log probably
> isn't needed.
Factor out the usb_port_runtime_{resume,suspend}() changes into a
standalone patch to allow conflict-free porting on top of stable v3.9+.
[1] https://lore.kernel.org/lkml/Pine.LNX.4.44L0.2002251419120.1485-100000@xxxxxxxxxxxxxxxxxxxx
Fixes: 971fcd492cebf5 ("usb: add runtime pm support for usb port device")
Cc: stable@xxxxxxxxxxxxxxx # v3.9+
Suggested-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20200226175036.14946-3-erosca@xxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/core/port.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -98,7 +98,10 @@ static int usb_port_runtime_resume(struc
if (!port_dev->is_superspeed && peer)
pm_runtime_get_sync(&peer->dev);
- usb_autopm_get_interface(intf);
+ retval = usb_autopm_get_interface(intf);
+ if (retval < 0)
+ return retval;
+
retval = usb_hub_set_port_power(hdev, hub, port1, true);
msleep(hub_power_on_good_delay(hub));
if (udev && !retval) {
@@ -151,7 +154,10 @@ static int usb_port_runtime_suspend(stru
if (usb_port_block_power_off)
return -EBUSY;
- usb_autopm_get_interface(intf);
+ retval = usb_autopm_get_interface(intf);
+ if (retval < 0)
+ return retval;
+
retval = usb_hub_set_port_power(hdev, hub, port1, false);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
if (!port_dev->is_superspeed)
