From: Shay Bar <shay.bar@xxxxxxxxxx> [ Upstream commit 33181ea7f5a62a17fbe55f0f73428ecb5e686be8 ] Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only. This is wrong because STA may not support > 80MHz BW. Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz. The "support_80_80" and "support_160" setting is based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" >From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@xxxxxxxxxx> Signed-off-by: Shay Bar <shay.bar@xxxxxxxxxx> Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@xxxxxxxxxx Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- net/mac80211/util.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 739e90555d8b9..decd46b383938 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2993,10 +2993,22 @@ bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw, int cf0, cf1; int ccfs0, ccfs1, ccfs2; int ccf0, ccf1; + u32 vht_cap; + bool support_80_80 = false; + bool support_160 = false; if (!oper || !htop) return false; + vht_cap = hw->wiphy->bands[chandef->chan->band]->vht_cap.cap; + support_160 = (vht_cap & (IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK | + IEEE80211_VHT_CAP_EXT_NSS_BW_MASK)); + support_80_80 = ((vht_cap & + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) || + (vht_cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ && + vht_cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) || + ((vht_cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) >> + IEEE80211_VHT_CAP_EXT_NSS_BW_SHIFT > 1)); ccfs0 = oper->center_freq_seg0_idx; ccfs1 = oper->center_freq_seg1_idx; ccfs2 = (le16_to_cpu(htop->operation_mode) & @@ -3024,10 +3036,10 @@ bool ieee80211_chandef_vht_oper(struct ieee80211_hw *hw, unsigned int diff; diff = abs(ccf1 - ccf0); - if (diff == 8) { + if ((diff == 8) && support_160) { new.width = NL80211_CHAN_WIDTH_160; new.center_freq1 = cf1; - } else if (diff > 8) { + } else if ((diff > 8) && support_80_80) { new.width = NL80211_CHAN_WIDTH_80P80; new.center_freq2 = cf1; } -- 2.20.1
