[PATCH AUTOSEL 5.5 55/66] net: macb: Properly handle phylink on at91rm9200

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>

[ Upstream commit ac2fcfa9fd26db67d7000677c05629c34cc94564 ]

at91ether_init was handling the phy mode and speed but since the switch to
phylink, the NCFGR register got overwritten by macb_mac_config(). The issue
is that the RM9200_RMII bit and the MACB_CLK_DIV32 field are cleared
but never restored as they conflict with the PAE, GBE and PCSSEL bits.

Add new capability to differentiate between EMAC and the other versions of
the IP and use it to set and avoid clearing the relevant bits.

Also, this fixes a NULL pointer dereference in macb_mac_link_up as the EMAC
doesn't use any rings/bufffers/queues.

Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/cadence/macb.h      |  1 +
 drivers/net/ethernet/cadence/macb_main.c | 60 +++++++++++++-----------
 2 files changed, 33 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 19fe4f4867c7d..c16cc1cb5874b 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -645,6 +645,7 @@
 #define MACB_CAPS_GEM_HAS_PTP			0x00000040
 #define MACB_CAPS_BD_RD_PREFETCH		0x00000080
 #define MACB_CAPS_NEEDS_RSTONUBR		0x00000100
+#define MACB_CAPS_MACB_IS_EMAC			0x08000000
 #define MACB_CAPS_FIFO_MODE			0x10000000
 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE	0x20000000
 #define MACB_CAPS_SG_DISABLED			0x40000000
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index e916fc223621d..20db44d7cda8d 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -533,8 +533,21 @@ static void macb_mac_config(struct phylink_config *config, unsigned int mode,
 	old_ctrl = ctrl = macb_or_gem_readl(bp, NCFGR);
 
 	/* Clear all the bits we might set later */
-	ctrl &= ~(GEM_BIT(GBE) | MACB_BIT(SPD) | MACB_BIT(FD) | MACB_BIT(PAE) |
-		  GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL));
+	ctrl &= ~(MACB_BIT(SPD) | MACB_BIT(FD) | MACB_BIT(PAE));
+
+	if (bp->caps & MACB_CAPS_MACB_IS_EMAC) {
+		if (state->interface == PHY_INTERFACE_MODE_RMII)
+			ctrl |= MACB_BIT(RM9200_RMII);
+	} else {
+		ctrl &= ~(GEM_BIT(GBE) | GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL));
+
+		/* We do not support MLO_PAUSE_RX yet */
+		if (state->pause & MLO_PAUSE_TX)
+			ctrl |= MACB_BIT(PAE);
+
+		if (state->interface == PHY_INTERFACE_MODE_SGMII)
+			ctrl |= GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL);
+	}
 
 	if (state->speed == SPEED_1000)
 		ctrl |= GEM_BIT(GBE);
@@ -544,13 +557,6 @@ static void macb_mac_config(struct phylink_config *config, unsigned int mode,
 	if (state->duplex)
 		ctrl |= MACB_BIT(FD);
 
-	/* We do not support MLO_PAUSE_RX yet */
-	if (state->pause & MLO_PAUSE_TX)
-		ctrl |= MACB_BIT(PAE);
-
-	if (state->interface == PHY_INTERFACE_MODE_SGMII)
-		ctrl |= GEM_BIT(SGMIIEN) | GEM_BIT(PCSSEL);
-
 	/* Apply the new configuration, if any */
 	if (old_ctrl ^ ctrl)
 		macb_or_gem_writel(bp, NCFGR, ctrl);
@@ -569,9 +575,10 @@ static void macb_mac_link_down(struct phylink_config *config, unsigned int mode,
 	unsigned int q;
 	u32 ctrl;
 
-	for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
-		queue_writel(queue, IDR,
-			     bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP));
+	if (!(bp->caps & MACB_CAPS_MACB_IS_EMAC))
+		for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
+			queue_writel(queue, IDR,
+				     bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP));
 
 	/* Disable Rx and Tx */
 	ctrl = macb_readl(bp, NCR) & ~(MACB_BIT(RE) | MACB_BIT(TE));
@@ -588,17 +595,19 @@ static void macb_mac_link_up(struct phylink_config *config, unsigned int mode,
 	struct macb_queue *queue;
 	unsigned int q;
 
-	macb_set_tx_clk(bp->tx_clk, bp->speed, ndev);
+	if (!(bp->caps & MACB_CAPS_MACB_IS_EMAC)) {
+		macb_set_tx_clk(bp->tx_clk, bp->speed, ndev);
 
-	/* Initialize rings & buffers as clearing MACB_BIT(TE) in link down
-	 * cleared the pipeline and control registers.
-	 */
-	bp->macbgem_ops.mog_init_rings(bp);
-	macb_init_buffers(bp);
+		/* Initialize rings & buffers as clearing MACB_BIT(TE) in link down
+		 * cleared the pipeline and control registers.
+		 */
+		bp->macbgem_ops.mog_init_rings(bp);
+		macb_init_buffers(bp);
 
-	for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
-		queue_writel(queue, IER,
-			     bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP));
+		for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
+			queue_writel(queue, IER,
+				     bp->rx_intr_mask | MACB_TX_INT_FLAGS | MACB_BIT(HRESP));
+	}
 
 	/* Enable Rx and Tx */
 	macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(RE) | MACB_BIT(TE));
@@ -4002,7 +4011,6 @@ static int at91ether_init(struct platform_device *pdev)
 	struct net_device *dev = platform_get_drvdata(pdev);
 	struct macb *bp = netdev_priv(dev);
 	int err;
-	u32 reg;
 
 	bp->queues[0].bp = bp;
 
@@ -4016,11 +4024,7 @@ static int at91ether_init(struct platform_device *pdev)
 
 	macb_writel(bp, NCR, 0);
 
-	reg = MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG);
-	if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
-		reg |= MACB_BIT(RM9200_RMII);
-
-	macb_writel(bp, NCFGR, reg);
+	macb_writel(bp, NCFGR, MACB_BF(CLK, MACB_CLK_DIV32) | MACB_BIT(BIG));
 
 	return 0;
 }
@@ -4179,7 +4183,7 @@ static const struct macb_config sama5d4_config = {
 };
 
 static const struct macb_config emac_config = {
-	.caps = MACB_CAPS_NEEDS_RSTONUBR,
+	.caps = MACB_CAPS_NEEDS_RSTONUBR | MACB_CAPS_MACB_IS_EMAC,
 	.clk_init = at91ether_clk_init,
 	.init = at91ether_init,
 };
-- 
2.20.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux