[PATCH 1/4] ARM64: Tegra: Enable I2C controller for EEPROM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit a5b6b67364cb ("arm64: tegra: Add ID EEPROM for Jetson TX1
module") populated the EEPROM on the Jetson TX1 module, but did not
enable the corresponding I2C controller. Enable the I2C controller so
that this EEPROM can be accessed.

Fixes: a5b6b67364cb ("arm64: tegra: Add ID EEPROM for Jetson TX1 module")

Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index cb58f79deb48..95b1a6e76e6e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -265,6 +265,8 @@
 	};
 
 	i2c@7000c500 {
+		status = "okay";
+
 		/* module ID EEPROM */
 		eeprom@50 {
 			compatible = "atmel,24c02";
-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux