[PATCH AUTOSEL 5.5 41/58] enic: prevent waking up stopped tx queues over watchdog reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Firo Yang <firo.yang@xxxxxxxx>

[ Upstream commit 0f90522591fd09dd201065c53ebefdfe3c6b55cb ]

Recent months, our customer reported several kernel crashes all
preceding with following message:
NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out
Error message of one of those crashes:
BUG: unable to handle kernel paging request at ffffffffa007e090

After analyzing severl vmcores, I found that most of crashes are
caused by memory corruption. And all the corrupted memory areas
are overwritten by data of network packets. Moreover, I also found
that the tx queues were enabled over watchdog reset.

After going through the source code, I found that in enic_stop(),
the tx queues stopped by netif_tx_disable() could be woken up over
a small time window between netif_tx_disable() and the
napi_disable() by the following code path:
napi_poll->
  enic_poll_msix_wq->
     vnic_cq_service->
        enic_wq_service->
           netif_wake_subqueue(enic->netdev, q_number)->
              test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state)
In turn, upper netowrk stack could queue skb to ENIC NIC though
enic_hard_start_xmit(). And this might introduce some race condition.

Our customer comfirmed that this kind of kernel crash doesn't occur over
90 days since they applied this patch.

Signed-off-by: Firo Yang <firo.yang@xxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/cisco/enic/enic_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index acb2856936d20..6e2ab10ad2e6f 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -2013,10 +2013,10 @@ static int enic_stop(struct net_device *netdev)
 		napi_disable(&enic->napi[i]);
 
 	netif_carrier_off(netdev);
-	netif_tx_disable(netdev);
 	if (vnic_dev_get_intr_mode(enic->vdev) == VNIC_DEV_INTR_MODE_MSIX)
 		for (i = 0; i < enic->wq_count; i++)
 			napi_disable(&enic->napi[enic_cq_wq(enic, i)]);
+	netif_tx_disable(netdev);
 
 	if (!enic_is_dynamic(enic) && !enic_is_sriov_vf(enic))
 		enic_dev_del_station_addr(enic);
-- 
2.20.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux