Re: [PATCH 3/3] mtd: spinand: Wait for the erase op to finish before writing a bad block marker

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 17 Feb 2020 11:39:19 +0100
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:

> Hi Frieder,
> 
> Schrempf Frieder <frieder.schrempf@xxxxxxxxxx> wrote on Tue, 11 Feb
> 2020 16:35:53 +0000:
> 
> > From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> > 
> > Currently when marking a block, we use spinand_erase_op() to erase
> > the block before writing the marker to the OOB area without waiting
> > for the operation to succeed. This can lead to the marking failing
> > silently and no bad block marker being written to the flash.
> > 
> > To fix this we reuse the spinand_erase() function, that already does
> > everything we need to do before actually writing the marker.
> >   
> 
> Thanks a lot for this series!
> 
> Yet I don't really understand the point of waiting for the erasure if
> it failed: we don't really care as programming (1 -> 0) cells is always
> possible. Are you sure this lead to an error?

Actually, I think I already pointed out that we should probably write
the BBM without erasing the block. IIRC, this logic has been copied
from rawnand where some controllers don't disable the ECC engine when
doing raw accesses, leading to ECC errors if the block is not erased
before BBMs are programmed. Assuming we don't let such drivers being
merged in spinand, this erase operation can be dropped.

> 
> Also, why just not calling spinand_erase() instead of
> spinand_erase_op() from spinand_markbad()?
> 
> > Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs")
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> > ---
> >  drivers/mtd/nand/spi/core.c | 56 ++++++++++++++++++-------------------
> >  1 file changed, 28 insertions(+), 28 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> > index 925db6269861..8a69d13639e2 100644
> > --- a/drivers/mtd/nand/spi/core.c
> > +++ b/drivers/mtd/nand/spi/core.c
> > @@ -600,6 +600,32 @@ static int spinand_mtd_block_isbad(struct mtd_info *mtd, loff_t offs)
> >  	return ret;
> >  }
> >  
> > +static int __spinand_erase(struct nand_device *nand, const struct nand_pos *pos,
> > +			   bool hard_fail)

I hate those __ prefix. Please find a more descriptive name
(spinand_erase_block() or spinand_erase_and_wait()?)

> > +{
> > +	struct spinand_device *spinand = nand_to_spinand(nand);
> > +	u8 status;
> > +	int ret;
> > +
> > +	ret = spinand_select_target(spinand, pos->target);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = spinand_write_enable_op(spinand);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = spinand_erase_op(spinand, pos);
> > +	if (ret && hard_fail)
> > +		return ret;
> > +
> > +	ret = spinand_wait(spinand, &status);
> > +	if (!ret && (status & STATUS_ERASE_FAILED))
> > +		ret = -EIO;
> > +
> > +	return ret;
> > +}
> > +
> >  static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
> >  {
> >  	struct spinand_device *spinand = nand_to_spinand(nand);
> > @@ -614,16 +640,10 @@ static int spinand_markbad(struct nand_device *nand, const struct nand_pos *pos)
> >  	int ret;
> >  
> >  	/* Erase block before marking it bad. */
> > -	ret = spinand_select_target(spinand, pos->target);
> > -	if (ret)
> > -		return ret;
> > -
> > -	ret = spinand_write_enable_op(spinand);
> > +	ret = __spinand_erase(nand, pos, false);
> >  	if (ret)
> >  		return ret;
> >  
> > -	spinand_erase_op(spinand, pos);
> > -
> >  	return spinand_write_page(spinand, &req);
> >  }
> >  
> > @@ -644,27 +664,7 @@ static int spinand_mtd_block_markbad(struct mtd_info *mtd, loff_t offs)
> >  
> >  static int spinand_erase(struct nand_device *nand, const struct nand_pos *pos)
> >  {
> > -	struct spinand_device *spinand = nand_to_spinand(nand);
> > -	u8 status;
> > -	int ret;
> > -
> > -	ret = spinand_select_target(spinand, pos->target);
> > -	if (ret)
> > -		return ret;
> > -
> > -	ret = spinand_write_enable_op(spinand);
> > -	if (ret)
> > -		return ret;
> > -
> > -	ret = spinand_erase_op(spinand, pos);
> > -	if (ret)
> > -		return ret;
> > -
> > -	ret = spinand_wait(spinand, &status);
> > -	if (!ret && (status & STATUS_ERASE_FAILED))
> > -		ret = -EIO;
> > -
> > -	return ret;
> > +	return __spinand_erase(nand, pos, true);
> >  }
> >  
> >  static int spinand_mtd_erase(struct mtd_info *mtd,  
> 
> Thanks,
> Miquèl




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux