[PATCH 4.19 50/52] scsi: megaraid_sas: Do not initiate OCR if controller is not in ready state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>

commit 6d7537270e3283b92f9b327da9d58a4de40fe8d0 upstream.

Driver initiates OCR if a DCMD command times out. But there is a deadlock
if the driver attempts to invoke another OCR before the mutex lock
(reset_mutex) is released from the previous session of OCR.

This patch takes care of the above scenario using new flag
MEGASAS_FUSION_OCR_NOT_POSSIBLE to indicate if OCR is possible.

Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/1579000882-20246-9-git-send-email-anand.lodnoor@xxxxxxxxxxxx
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx>
Signed-off-by: Anand Lodnoor <anand.lodnoor@xxxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>


---
 drivers/scsi/megaraid/megaraid_sas_base.c   |    3 ++-
 drivers/scsi/megaraid/megaraid_sas_fusion.c |    3 ++-
 drivers/scsi/megaraid/megaraid_sas_fusion.h |    1 +
 3 files changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -4177,7 +4177,8 @@ dcmd_timeout_ocr_possible(struct megasas
 	if (instance->adapter_type == MFI_SERIES)
 		return KILL_ADAPTER;
 	else if (instance->unload ||
-			test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags))
+			test_bit(MEGASAS_FUSION_OCR_NOT_POSSIBLE,
+				 &instance->reset_flags))
 		return IGNORE_TIMEOUT;
 	else
 		return INITIATE_OCR;
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -4558,6 +4558,7 @@ int megasas_reset_fusion(struct Scsi_Hos
 	if (instance->requestorId && !instance->skip_heartbeat_timer_del)
 		del_timer_sync(&instance->sriov_heartbeat_timer);
 	set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
+	set_bit(MEGASAS_FUSION_OCR_NOT_POSSIBLE, &instance->reset_flags);
 	atomic_set(&instance->adprecovery, MEGASAS_ADPRESET_SM_POLLING);
 	instance->instancet->disable_intr(instance);
 	megasas_sync_irqs((unsigned long)instance);
@@ -4747,7 +4748,7 @@ fail_kill_adapter:
 		atomic_set(&instance->adprecovery, MEGASAS_HBA_OPERATIONAL);
 	}
 out:
-	clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
+	clear_bit(MEGASAS_FUSION_OCR_NOT_POSSIBLE, &instance->reset_flags);
 	mutex_unlock(&instance->reset_mutex);
 	return retval;
 }
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -102,6 +102,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE {
 
 #define MEGASAS_FP_CMD_LEN	16
 #define MEGASAS_FUSION_IN_RESET 0
+#define MEGASAS_FUSION_OCR_NOT_POSSIBLE 1
 #define THRESHOLD_REPLY_COUNT 50
 #define RAID_1_PEER_CMDS 2
 #define JBOD_MAPS_COUNT	2





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux